Dual weaver rail for the ARTEMIS P15. Clamps around the barrel directly under the scope mounting rail by means of 2x M3 bolts and nuts (supplied in stainless steel).
This clamp set captures the barrel, partially capturing the reservoir - creating more of a spacer/seating on the reservoir. This will maintain the minimum spacing distance between the two cylinders, but will not create a maximum distancing.
These two symmetric halves fill-up the gapped area that otherwise comes across as bare or skeletonized behind the baffling sound muffler tube fitted around the frontal barrel, lending a more voluminous appearance. The rail grids are moreover symmetric, so you won't have to worry about attachments sitting offset to one another.
Featuring 10 rail slots each, one can mount items that need to be easily accessed, such as your .22 14 shot magazine holders, your corded NITECORE NEW P30 for nighttime pest control (which can be perused here).
Alternatively, if your P15 has a power plenum professionally installed and you can comfortably shoot your H&N 27gr .217 slugs, then, for that heavier duty shooting, we definitely recommend this red laser kit from HAWKE or, for this bulkier unbranded green laser. Both these options come w/ a remote coil that has a pressure pad at the end, for toggling the laser by means of applying pressure onto the pad.
The nicest feature of these clamps is that the load they would bear, is on the bullpup's center of mass, so the rifle would neither be rear nor front heavy.
Some users also prefer adding a laser reflex sight there, for shots necessary of up to 10 or 20 meters, depending on the distance zeroed in for.
Tail-end double weaver rails are available on request, which reaches back to the breach.
SPECIFICATIONS
Length: 105mm
Barrel clearance : 13.30mm
Spacer (between barrel and reservoir): 9.10mm
Rail clearance:
Right: 5.89mm
Left: 4.00mm
