Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Please check on stock availability with us via Bobshop messages. Sometimes stock updates are done a few days apart and stock could no longer be available when ordered on Bobshop.
i29 is designed based on the new Wi-Fi 6 technology. It realizes a bandwidth of 160 MHz and a 5 GHz rate as high as 2.4 Gbps, a rate three times higher than that of ordinary Wi-Fi 5 APs and two times that of ordinary Wi-Fi 6 APs. The application of such new technologies as OFDMA, spatial multiplexing, and MU-MIMO drives the network capacity of a single i29 to 4 times higher. The high-power RF design helps maintain the quality of Wi-Fi signal even over a long distance, so that wireless clients and AP can work under the high-performance Wi-Fi 6 mode. i29 is a perfect choice for such locations as businesses and hotels to deploy high-performance Wi-Fi networks. Hardware Dimension F250.6*55 mm Ethernet Interface One 10/100/1000 Mbps Ethernet Port One 10/100/1000 Mbps Ethernet Port (PoE) Antenna 4*4 dBi Button 1*Reset LED Indicator RGB Maximum Power Consumption 15.74 W Power supply standard IEEE 802.3at PoE Wireless Frequency Band 2.4 GHz, 5 GHz Data Rate 2.4 GHz data rate:1-574 Mbps 5 GHz data rate:6-2402 Mbps Wireless Standard IEEE 802.11a/b/g/n/ac/ax Channel width 20 MHz/40 MHz/80 MHz/160 MHz Max Transmit Power 2.4 GHz Max. output power:29+/-1.5 dBm 5 GHz Max. output power:29+/-1.5 dBm Sensitivity 802.11b RX sensitivity:-97 dBm 2.4 GHz 802.11n (MCS7) RX sensitivity:-75 dBm 5 GHz 802.11a RX sensitivity:-95 dBm 5 GHz 802.11n (MCS7) RX sensitivity:-75 dBm Software MU-MIMO 2X2 MU-MIMO Operating Mode AP Hide SSID Supported Max. No. of SSID 2.4 GHz: 7 5 GHz: 4 Max. connected clients 254 WEP Supported 802.11 k/v Supported Fast roaming Supported TWT Supported Beamforming Supported OFDMA Supported WPA-PSK AES/TKIP WPA2-PSK AES/TKIP WPA3-ASE AES WPA Supported WPA2 Supported Access control MAC address-based Adjustable power transmit Supported AP isolation Supported Frequency analysis Supported Connected clients control Supported RSSI Threshold Supported WMM VLAN tagging for SSID Supported LED control Supported Diagnostics Ping, Traceroute Schedule Reboot Supported Reboot at specified interval Supported Centralized Management Supported System Logs Supported Firmware upgrade Supported Reboot Supported Reset Button Backup configuration Supported Restore configuration Supported Others Default login IP 192.168.0.254 Default Login Username admin Default Login Password admin Operation Temperature -10? 45? Operating humidity (10% 90%) RH, non-condensing Storage temperature -30? 70? Storage humidity (10% 90%) RH, non-condensing