| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
i26 is a Gigabit dual-band ceiling AP built based on the new Wi-Fi 6 standard, with a wireless rate of up to 1500Mbps; supports fast roaming and can automatically select a wireless network with better quality; supports one-click wireless network optimization to simplify network debugging steps.
Model i26
Category Ceiling
Dimension `d6176*43.5 mm
Interface One 10/100/1000 Mbps Ethernet Port (PoE)
Button 1*Reset
LED Indicator 1*SYS
Maximum Power Consumption 10.5W
Power Supply PoE 802.3af
Max. Number of Clients 256
Recommended Clients 50
Antenna 2*4 dBi + 2*4 dBi
2.4GHz maximum power 11b mode, transmit power 22`b11.5dBm
11g mode, transmit power 22`b11.5dBm
11n mode, MCS7 transmit power 20`b11.5dBm
5GHz maximum power 11a mode, transmit power 22`b11.5dBm
11n mode, MCS7 transmit power 19`b11.5dBm
11ac mode, MCS9 transmit power 15`b11.5dBm
11ax mode, MCS11 transmit power 15`b11.5dBm
Reception Sensitivity 2.4GHz 802.11b -98dBm
2.4GHz 802.11n (MCS7) -77dBm
5GHz 802.11a -95dBm
5GHz 802.11n (40M-MCS7) -76dBm
5GHz 802.11ax (80M-MCS11) -64dBm
Frequency Range 2.4GHz&5GHz
Standard&Protocol IEEE 802.11b/g/n/ac/ax
Maximum wireless speed 2.4GHz: 300Mbps
5GHz: 1201Mbps
Bandwidth 20MHz/40MHz/80MHz
Operating Mode AP/Client+AP
Max. No. of SSID 2.4GHz: 8
5GHz: 4
Hide SSID Supported
OFDMA Supported
Beamforming Supported
Fast roaming`a3`a8802.11k/v/r`a3`a9 Supported
WEP Supported
WPA-PSK Supported
WPA2-PSK Supported
WPA Supported
WPA2 Supported
WPA3-ASE Supported
Access control Supported
Adjustable power transmit Supported
Automatic channel Supported
AP isolation Supported
Guest network Supported
Connected clients control Supported
RSSI Threshold Supported
Weak signal terminal elimination Supported
Prioritize 5 GHz Supported
VLAN tagging for SSID Supported
LED control Supported
MU-MIMO Supported
Diagnostics tool Supported
Reboot at specified interval Supported
Schedule Reboot Supported
Device management Web,Router,CloudFi APP,AP Controller
System Logs Supported
Firmware upgrade Supported
Reboot Supported
Reset Supported
Backup configuration Supported
Restore configuration Supported
Default login IP 192.168.0.254
Operation Temperature -10 ~ 40
Operating humidity 10%~90% non-condensing
Storage temperature -30 ~ 70
Storage humidity 5%~90% non-condensing
