Texecom Impaq S Wired Shock Sensor Grade 2 White

The Texecom Impaq S Wired Shock Sensor is a Grade 2 perimeter detector designed to provide early warning of attempted forced entry through windows, doors and other solid surfaces. Available in white or brown, it uses VIBER accelerometer technology and digital signal processing to analyse shock travelling through the mounting surface. Five selectable sensitivity levels allow an installer to configure the detector for materials ranging from window frames and timber to concrete. This model detects shock and vibration only and does not include a magnetic opening contact.

Key Features

• Detects attempted entry at the perimeter. Monitors the mounting surface for force and vibration associated with an attack, allowing the alarm system to respond before an intruder has fully entered the property.
• Senses shock in three dimensions. VIBER accelerometer technology allows the detector to recognise transmitted shock regardless of its mounting orientation.
• Adapts to different surfaces. Five digital sensitivity settings allow an installer to match the response to framed windows, timber, concrete and other suitable surfaces.
• Filters unsuitable alarm sources. Digital signal processing analyses vibration while helping the detector discriminate against airborne high-frequency noise.
• Simplifies supervised-zone wiring. Selectable built-in end-of-line resistors support several commonly used alarm-panel wiring configurations.
• Assists with accurate commissioning. LED-guided sensitivity setup helps the installer test the mounting position and select an appropriate response level.
• Matches common frame colours. Choose white for light uPVC or painted frames, or brown for timber and darker surrounds.
• Meets Grade 2 shock-detection requirements. Independently certified to EN50131-2-8 Grade 2 and intended for suitable indoor Class II environments.

Did You Know?

• The Impaq S detects shock but does not detect whether a door or window has opened. Install a separate magnetic contact when both forced-entry detection and opening detection are required.
• The most sensitive setting is not automatically the correct one. Sensitivity should be matched to the mounting material and tested on site, as an unnecessarily high setting may increase nuisance activations.
• Because the sensor detects in three dimensions, the installer has more freedom when positioning it. The detector still needs firm contact with the protected surface so that vibration can transfer correctly.

Compatibility & Alarm-Panel Support

The Impaq S works with Texecom and other compatible hardwired alarm control panels that accept normally closed or supported end-of-line zone wiring. Selectable resistor configurations are provided for commonly used Texecom, DSC, Honeywell and Scantronic or Menvier systems.

The detector requires wired power and zone connections. It is not a wireless device and does not connect directly to an app. Correct sensitivity, resistor selection and zone programming must be completed during installation.

Whats Included

• 1 x Texecom Impaq S Wired Shock Sensor in the selected colour

Note: Alarm cable, magnetic contact, installation labour and optional accessories are not included