Thermostat Temperature Controller DC 9-15V:
Temperature control range: -50 ~ 110 ° C
Measurement Accuracy: 0.1 ° C
Refresh rate: 0.5 S
Input Power: DC12V
Measuring inputs: NTC (10K 0.5%) Waterproof sensor
Output: 1 Channel relay output, capacity = 10A
Environmental requirements: -10 ~ 60 degree Humidity 20% -85%
Size: 48 (L) * 40 (W) * 14 (D) mm
Power consumption: Static current:<=35MA
Plastic cover is available for this unit. Please search Controller Temperature W1209 Clear Cover
Technical parameters
• Control range: -50 ~ 110
• Input Power: DC 12V
• Resolution: -9.9-99.9 0.1 , other temperature ranges 1
• Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
• Measurement accuracy: 0.1
• Output range: 1 way 10A relay
• Control accuracy: 0.1
• Environmental requirements: -10-60 , humidity 20% -85%
• Hysteresis accuracy: 0.1
• Size: 48 * 40mm
• Refresh rate: 0.5S
• Power consumption: Static current: <= 35MA,attract current:<= 65MA
• Temperature protection :0-110
• Display Type: 0.28 " three digital display tube
How to use:
• Connect the power supply and the load, you can supply to the controller,Is displayed as a measured temperature,Press the SET button, the display flashes the temperature,Press + - to set the desired temperature,After setting press SET to confirm return,The controller automatically performs the relay by setting off!
• Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
• Parameter Function:Long press SET 5 seconds to enter the main menu settings, press the + - toggle P0 ... P8 long press SET or 10 seconds of no key activity confirmed their return to the controller
Code Code Description Setting range Factory setting
P0 Cooling /Heating C/H C
P1 Hysteresis setting 0.5-15 2
P2 Highest setting upper limit 110 110
P3 Lowest setting upper limit -50 -50
P4 Temperature correction -7-7 0
P5 Delay start time 0-10 Minutes 0
P6 High temperature alarm 0-110 OFF
Off state, long press + - boot to restore the factory settings
