Thermostat Temperature Controller -50 to +110deg DC 12V

Thermostat Temperature Controller DC 9-15V:

Temperature control range: -50 ~ 110 ° C
Measurement Accuracy: 0.1 ° C
Refresh rate: 0.5 S
Input Power: DC12V
Measuring inputs: NTC (10K 0.5%) Waterproof sensor
Output: 1 Channel relay output, capacity = 10A
Environmental requirements: -10 ~ 60 degree Humidity 20% -85%
Size: 48 (L) * 40 (W) * 14 (D) mm
Power consumption: Static current:<=35MA

Technical parameters
•    Control range: -50 ~ 110
•    Input Power: DC 12V
•    Resolution: -9.9-99.9 0.1 , other temperature ranges 1
•    Measuring inputs: NTC (10K 0.5%) Waterproof sensor 0.5M
•    Measurement accuracy: 0.1
•    Output range: 1 way 10A relay
•    Control accuracy: 0.1
•    Environmental requirements: -10-60 , humidity 20% -85%
•    Hysteresis accuracy: 0.1
•    Size: 48 * 40mm
•    Refresh rate: 0.5S
•    Power consumption: Static current: <= 35MA,attract current:<= 65MA
•    Temperature protection :0-110
•    Display Type: 0.28 " three digital display tube
 How to use:
•    Connect the power supply and the load, you can supply to the controller,Is displayed as a measured temperature,Press the SET button, the display flashes the temperature,Press + - to set the desired temperature,After setting press SET to confirm return,The controller automatically performs the relay by setting off!
•    Lights, LED status descriptions:Indicator: Off The relay is switched off, Always indicate the relay is closed.LED: Shows LL is the sensor open, showing HH is out of range, the thermostat will be forced to close the relay, the display --- as high temperature protection.
•    Parameter Function:Long press SET 5 seconds to enter the main menu settings, press the + - toggle P0 ... P8 long press SET or 10 seconds of no key activity confirmed their return to the controller  
Code          Code Description           Setting range         Factory setting
P0               Cooling /Heating                    C/H                          C
P1               Hysteresis setting                 0.5-15                        2
P2               Highest setting upper limit      110                       110
P3               Lowest setting upper limit       -50                       -50
P4               Temperature correction          -7-7                        0
P5               Delay start time                  0-10 Minutes               0
P6               High temperature alarm        0-110                     OFF
Off state, long press + - boot to restore the factory settings