Tire Pressure Sensor for 2020 DURANGO GRAND TPMS SENSOR Tire Pressure Monitoring System 68443470AA

[No sensor programming Required] The Tire Pressure Sensor is 100% new and come pre-programmed specifically for your make\/model\/year of vehicle,need activate them by scal tool or \re-learning\.Simplified Relearn : OBDII requiredInstallation Process:1. Loosen the tire: Remove the valve cap and core and deflate the tire.2. Dismount the tire: Clamp the tire onto the tire changer, and adjust the valve at 1 o'clock relative to the tire separation head. Insert the tire tool and lift the tire bead onto the mounting head to discount the head.3. Dismount the sensor: with a screwdriver remove the fastening screw and sensor from the Valve stem, then loosen the nut and remove the valve.4. Mount sensor and valve: Slide the valve stem through the valve hole of the rim. Tighten the screw-nut with 4.0 Nm with the help of the positioning pin. Assemble the sensor body against the rim and tighten the screw.5. Mount the tire: Place the tire on the rim, making sure that the valve the separation head at an angle of 180 degrees. Mount the tire over the rim.Replace for Part Number:68443470AACOMPREHENSIVE VEHICLE COVERAGEApplication:FOR DURANGO 2020FOR GRAND 2020Colour: blackMaterial: metal + plasticPackage Contents:4 * Tire pressure sensorOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.