Topshak TS-CD1 220V 450W 450 Portable Soldering Hot Air Gun Desolder Power Nozzle Tool
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615089562
Features:
High quality engine and heating elementts which can supply natural and gentle wind.
Suitable for surface soldering and rework, such as SOIC, CHIP, QFP, PLCC, BGA, etc.
Compact design, easy to use and carry.
Special soldering way without touching the solder joint which avoid the parts moving and thermal shock.
The temperature and air volume can be easily and precisely adjusted.
LCD display for hot air temperature, convenient for operation.
Come with 4 different nozzles to meet different soldering needs.
Usage method:
1. Put the plug in the socket AC.220V.
2. Turn on the power.
3. According to soldered object size,regulatiing the gas speed button to control the gas current, regulating the temperature button until the screen show the temperature you want.
4. When the work is over,turn the minimum.After blowing cold gas for about 30 seconds then turn off the power.This will prolong the heating element life.
5. If changing air collector irst you will tune off the power and cool it.
Close hot air guun
Be sure to follow the following before closing the hot air guun
1. Adjust the temperature heater to the minimum gear
2. Adjust the air volume air to the maximum position
3. Hold on for 30 seconds,or wait for the temperature display to fall to 150 degrees Celsius,than you can turn off the turn off the power
Attention:
1. The hot air guun temperature should not exceed 450 a??, otherwise might easily damage or affect
the service life of hot air guun
2. Be sure to cool off before a hot air guun is turned off.
3. Metal drums built with friable insulation materials, please handle with care, never fall heavy shock.
Specification:
Plug Type: EU Plug(include a plug adaptor)
Power Supply: AC 220V(EU)
Working Current:2.5A
Power: 450W(EU)
Color: Black+Grey
Cable Length: 142cm/55.91(appr.)
Size: (Dia.)?x?(H) 7?x?29.5cm/2.76?x?11.61(appr.)
Package includes:
1 x Hot Air Gun
4 x Nozzles
1 x Bracket
1 x User Manual
Details pictures:
High quality engine and heating elementts which can supply natural and gentle wind.
Suitable for surface soldering and rework, such as SOIC, CHIP, QFP, PLCC, BGA, etc.
Compact design, easy to use and carry.
Special soldering way without touching the solder joint which avoid the parts moving and thermal shock.
The temperature and air volume can be easily and precisely adjusted.
LCD display for hot air temperature, convenient for operation.
Come with 4 different nozzles to meet different soldering needs.
Usage method:
1. Put the plug in the socket AC.220V.
2. Turn on the power.
3. According to soldered object size,regulatiing the gas speed button to control the gas current, regulating the temperature button until the screen show the temperature you want.
4. When the work is over,turn the minimum.After blowing cold gas for about 30 seconds then turn off the power.This will prolong the heating element life.
5. If changing air collector irst you will tune off the power and cool it.
Close hot air guun
Be sure to follow the following before closing the hot air guun
1. Adjust the temperature heater to the minimum gear
2. Adjust the air volume air to the maximum position
3. Hold on for 30 seconds,or wait for the temperature display to fall to 150 degrees Celsius,than you can turn off the turn off the power
Attention:
1. The hot air guun temperature should not exceed 450 a??, otherwise might easily damage or affect
the service life of hot air guun
2. Be sure to cool off before a hot air guun is turned off.
3. Metal drums built with friable insulation materials, please handle with care, never fall heavy shock.
Specification:
Plug Type: EU Plug(include a plug adaptor)
Power Supply: AC 220V(EU)
Working Current:2.5A
Power: 450W(EU)
Color: Black+Grey
Cable Length: 142cm/55.91(appr.)
Size: (Dia.)?x?(H) 7?x?29.5cm/2.76?x?11.61(appr.)
Package includes:
1 x Hot Air Gun
4 x Nozzles
1 x Bracket
1 x User Manual
Details pictures:
