Tork Craft Annular Hole Cutter Tct 32 X 35Mm Weld Shank 19.05Mm

Tork Craft Annular Hole Cutter â" TCT 32 Ã 35 mm, 19.05 mm (3/4') Weldon

Size: 32 mm x 35 mm [3/4' Weldon Shank]

The 32 mm TCT annular cutter removes only a thin ring of material for quicker holes, smoother finishes and lower feed force. Carbide-tipped teeth maintain speed and edge retention in demanding steels, while the 19.05 mm (3/4â³) Weldon shank gives a secure, slip-free drive in most magnetic-base drills and compatible arbors.

Specifications

Features

• 32 mm diameter ideal for larger bolt clearances, bushings and conduit penetrations.
• 35 mm cutting depth covers common plate thicknesses and stacked material.
• 19.05 mm (3/4') Weldon shank reliable two-flat drive for mag drills.
• TCT teeth wear-resistant carbide tips for long life in steel and cast iron.
• Thin-wall, multi-flute body rapid penetration and efficient chip evacuation.

Benefits

• High productivity faster than twist drilling as only the periphery is cut.
• Cleaner holes reduced burrs minimize post-processing.
• Lower effort reduced feed pressure, helpful on vertical and overhead work.
• Consistent accuracy pilot-pin guided centring and controlled slug ejection.

Extra Information

• Use in a magnetic-base drill or drill press with a suitable Weldon-shank arbor.
• A pilot pin is required for centring and slug ejection (sold separately).
• Apply cutting fluid and steady feed, especially on stainless or harder grades.

Safety

• Wear eye, ear and gloves protection; use cutting fluid to control heat and improve chip flow.
• Ensure magnet adhesion and workpiece stability before drilling; tether the drill when working at height.
• Do not use hammer action; keep a steady feed and allow the slug to eject.
• Disconnect power before changing cutters or pilot pins.