| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Buffing pad
Buffing pad Material: Cotton
Diameter: 75mm
Bore: 6.0mm
Application:
The buffing pad is supplied with a chuck adaptor spindle.
It is ideal for buffing jewelry and other metals. The concentrically sewn sections add strength to the buffing pad and it cleans surfaces without damaging it.
How to use the compounds and the buffing pads:
The adaptor is used to hold the buffing pad in the drill's chuck. Faste the correct buffing pad in the adaptor. Make sure the flanges are on bot sides of the buffing pad.
It would be best to use a drill press to polish metals. If a drill pres is not accessible, use adaptor
TCV01810 with a portable drill with a colla diameter of 43mm. Tighten the adaptor in the drill's chuck.
The buffing pad should revolve towards you at full speed. Pass th compound lightly across the face of the buffing pad. To ensure that th compound is evenly spread, hold a clean piece of scrap metal against the
face of the buffinpad. This will eliminate lumps of compound from occurring. If desired, heat the item to 65 degreeC using an oven or a heater. Warmin the metal keeps the compound on the buffing pad. A cool item will draw compound from the pad and leave deposits. Use a glove to handle the warm item.
Hold the metal lightly against the buffing pad. Allow the compound to d the work If more compound is required, apply it using a wiping motion. Do no overload the buffing pad.
Use Tork Craft's line of buffing pads and compounds to clean, polish and bring to a high gloss, all metals and plastics.
Heavy Duty Cleaning
Regular Cleaning
Light Polishing
High Gloss Polishing
What's in the box
1 x Cotton Buff 75mm x 6mm Shank
