Tork Craft Diamond Core Bit 22Mm For Tiles
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product details
Tork Craft Diamond Core Bit 22Mm For Tiles
Tork Craft, the name everybody knows. Quality tools and accessories for every job. Every new Tork Craft product goes through our Product Testing department for quality approval. Browse the Tork Craft website to experience the extensive catalogue.
Application:
The Diamond Core Bit Is Used To Drill Holes In:
- Ceramic Tiles
- Marble
- Grade 5 Porcelain (Hardest)
- Granite
- Glass
- Slate
The Diamond Core Cuts Faster, Smoother And Lasts Longer Than Any Other Coredrills.
How To Use The Diamond Core Bit:
The Diamond Core Drill Bit Must Be Used With Water At All Times Whendrilling. The Water Serves As A Coolant To Prevent The Diamonds Fromoverheating. The Maximum Allowable Temperature For A Diamond Core Bit Is 500&Deg;C.
There Is No Pilot Drill With The Diamond Core Bit. A Low Rpm Rotary Drillwith A Planetary Gearbox Is Required To Be Used With A Diamond Core Bit. It Ispossible To Use A Cordless Drill, But In The Lowest Gear Setting. No Hammeraction Is Used.
- Tightly Fasten The Diamond Core Bit In The Drill'S Chuck.
- Keep The Bit Steady At A 45? Angle With The Starting Point On The Edge Of The Assigned Area To Be Drilled Whilst The Bit Is Rotating.
- A Notch Will Be Made (This Is Normal). Gradually Move The Drill From 45&Deg; To 90&Deg; And Continue Drilling Until Finished.
- Allow The Diamond Core Bit To Cool Down Completely Before Proceeding To Drill Another Hole.
Water Can Be Applied By:
- Spraying Water On The Surface,
- Using A Wet Sponge,
- Attaching A Water Feed Device. This Is Necessary When Drilling Into A Wall Tile.
Please Have A Look At The Video In The Tabs Aboveshowing How To Use The Diamond Core Bit.
An Indication Of The Correct Spindle Speed:
| Diamond Core Bit Diameter | Spindle Speed |
| 5.0Mm | 800 Rpm |
| 6.0Mm | 600 Rpm |
| 7.0Mm | 500 Rpm |
| 8.0Mm | 500 Rpm |
| 10.0Mm | 400 Rpm |
| More Than 10.0Mm (>10.0Mm) | Less Than 400 Rpm |
&Nbsp;
Important:
The Tool Life Will Mostly Depend On The Proper Usage And The Hardness Of The Itemsdrilled Into. It Is Normal For A Diamond Core Bit To Last Up To 10 Or Moredrilled Holes In Hard Tiles. Please Remember To Always Usewater When Drilling With Diamond Core Bits.
&Nbsp;
Brand :Tork Craft
SKU :TC180822
Barcode :6009515806316