Tork Craft Diamond Core Bit 25Mm For Tiles

New
-+
460 available
R140.11
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item ready to ship within 7 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:
 
Standard Delivery
Main centres:  1-3 business days
Regional areas: 3-4 business days
Remote areas: 3-5 business days
Get it now, pay later
Seller
Buyer Protection

Product details

Condition
New
Location
South Africa
Product code
TC180825
Bob Shop ID
607211676

Tork Craft Diamond Core Bit 25Mm For Tiles

Tork Craft, the name everybody knows. Quality tools and accessories for every job. Every new Tork Craft product goes through our Product Testing department for quality approval. Browse the Tork Craft website to experience the extensive catalogue.

25Mm Diamond Core Bit

Application:

The Diamond Core Bit Is Used To Drill Holes In:

  • Ceramic Tiles
  • Marble
  • Grade 5 Porcelain (Hardest)
  • Granite
  • Glass
  • Slate

The Diamond Core Cuts Faster, Smoother And Lasts Longer Than Any Other Coredrills.

How To Use The Diamond Core Bit:

The Diamond Core Drill Bit Must Be Used With Water At All Times Whendrilling. The Water Serves As A Coolant To Prevent The Diamonds Fromoverheating. The Maximum Allowable Temperature For A Diamond Core Bit Is 500&Deg;C.

There Is No Pilot Drill With The Diamond Core Bit. A Low Rpm Rotary Drillwith A Planetary Gearbox Is Required To Be Used With A Diamond Core Bit. It Ispossible To Use A Cordless Drill, But In The Lowest Gear Setting. No Hammeraction Is Used.

  1. Tightly Fasten The Diamond Core Bit In The Drill'S Chuck.
  2. Keep The Bit Steady At A 45? Angle With The Starting Point On The Edge Of The Assigned Area To Be Drilled Whilst The Bit Is Rotating.
  3. A Notch Will Be Made (This Is Normal). Gradually Move The Drill From 45&Deg; To 90&Deg; And Continue Drilling Until Finished.
  4. Allow The Diamond Core Bit To Cool Down Completely Before Proceeding To Drill Another Hole.

Water Can Be Applied By:

  • Spraying Water On The Surface,
  • Using A Wet Sponge,
  • Attaching A Water Feed Device. This Is Necessary When Drilling Into A Wall Tile.

Please Have A Look At The Video In The Tabs Aboveshowing How To Use The Diamond Core Bit.

An Indication Of The Correct Spindle Speed:

Diamond Core Bit DiameterSpindle Speed
5.0Mm800 Rpm
6.0Mm600 Rpm
7.0Mm500 Rpm
8.0Mm500 Rpm
10.0Mm400 Rpm
More Than 10.0Mm (>10.0Mm)Less Than 400 Rpm

&Nbsp;

Important:
The Tool Life Will Mostly Depend On The Proper Usage And The Hardness Of The Itemsdrilled Into. It Is Normal For A Diamond Core Bit To Last Up To 10 Or Moredrilled Holes In Hard Tiles. Please Remember To Always Usewater When Drilling With Diamond Core Bits.

&Nbsp;

Brand :Tork Craft
SKU :TC180825
Barcode :6009515802394

More from this seller

View all
Tork Craft Forstner Bit15Mm Carded
R85.87
R30 shipping
Pro-Tech Lock Mitre Bit 1/4' Shank
R1,186.49
Eurolux Oven Lamp Golfball E14 25w Blister Single
R53.10
R30 shipping
Eurolux Lamedo Square Ground Light Satin Chrome
R702.85
Add to cart

Similar products

R30 shipping
Tork Craft Diamond Core Bit 32Mm For Tiles
R151.41
R30 shipping
Tork Craft Diamond Core Bit 19Mm For Tiles
R111.86
R30 shipping
Tork Craft Diamond Core Bit 50Mm For Tiles
R249.72
R30 shipping
Tork Craft Diamond Core Bit 20Mm For Tiles
R125.42