Name: Tork Craft - Flange Nut Back & Front ( 1/2) Service Kit - Tork Craft - Flange Nut Back & Front ( ...
SKU: 24213467
Price: 123.42 ZAR
Availability: InStock

Tork Craft - Flange Nut Back & Front ( 1/2) Service Kit - Tork Craft - Flange Nut Back & Front ( ...

New

104 available

R123.42

Shipping

R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate

The seller allows collection for this item. Buyers will receive the collection address and time once the order is ready.

The seller has indicated that they will usually have this item ready to ship within 3 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:

Standard Delivery

Main centres:	1-3 business days
Regional areas:	3-4 business days
Remote areas:	3-5 business days

Seller

Toolhome419

84.56 % Positive ratings

Buyer protection

How you're covered

Get it now, pay later

Condition

New

Location

South Africa

Product code

24213467

Bob Shop ID

690239549

Tork Craft Flange Nut Back & Front (1/2) Service Kit For TCAG0115 Angle Grinder

At a Glance: Replacement back flange and front nut kit for the TCAG0115 115mm angle grinder

The flange nut set on your angle grinder does the crucial job of clamping cutting and grinding discs safely at 11 000 rpm. If the back flange is worn, dirty or damaged or the front nut is rounded from years of use discs can slip, vibrate or be difficult to tighten and release. The Tork Craft TCAG0115-SK01 Flange Nut Back & Front (1/2) Service Kit is a genuine spare for the TCAG0115 115mm 900 W angle grinder, giving you a fresh back flange and front nut so you can mount your 115mm discs with confidence again.

Genuine back flange and front nut kit for the Tork Craft TCAG0115 115mm Angle Grinder 900 W 11 000 rpm 220 V

This compact service kit includes the two key clamping parts the rear backing flange that supports the disc against the grinder spindle, and the front flange nut that tightens down on top. They are matched to the TCAG0115 factory specification, helping ensure discs run true, change easily and stay firmly locked during cutting and grinding work on steel, masonry and other materials.

Features

Genuine Tork Craft spare kit Original back flange and front flange nut for the TCAG0115 115mm angle grinder.
Matched back and front flanges Designed to work together for correct disc support and clamping pressure.
Factory fit for 115mm discs Sized to suit the disc and spindle arrangement on the TCAG0115 grinder.
Durable metal construction Robust components built for high-speed grinding and cutting duty.
Compact, easy-to-store kit Small spare that is ideal to keep in the toolbox or workshop spares drawer.

Benefits

Restore safe disc clamping: Fresh flanges help prevent discs from slipping or loosening during use.
Improve disc life and performance: Correct support reduces stress and vibration at the disc hub.
Make disc changes easier: A clean, undamaged nut is far simpler to tighten and release with a spanner.
Extend grinder service life: Properly supported discs reduce strain on bearings, spindle and guards.
Cost-effective repair: Replace just the worn clamping parts instead of replacing the angle grinder.

Specifications

Description	Spec
Brand	Tork Craft
Cat No.	TCAG0115-SK01
Product Type	Flange Nut Back & Front Service Kit
Compatible Tool Model	TCAG0115 Angle Grinder 115mm 900 W 11 000 rpm 220 V
Included Components	Back flange and front flange nut
Typical Disc Size	115 mm angle grinder discs (as per TCAG0115 specification)
Typical Application	Replacement of worn, damaged or lost angle grinder flange nuts
Pack Size	1 × flange nut back & front kit

Extra Info

Extra Information

These spare parts are for the Tork Craft TCAG0115 Angle Grinder 115mm 900 W 11 000 rpm 220 V always confirm the model number on your tool.
Ideal when the original flange nut is rounded, seized or damaged, or when the back flange face is scored and no longer supports discs evenly.
Always inspect discs for cracks or damage before clamping them between the new back flange and front nut.
The price shown on the product page is the unit price for one TCAG0115-SK01 service kit PACK SIZE (where shown) indicates recommended ordering quantity and how many kits are boxed together.
Shipping dimensions and weight can be captured separately in your product admin console and are not included in the specifications table.

Pro Tip

When fitting the new flange nut back and front kit, take the opportunity to clean old grinding dust from the spindle and guard area. A quick wipe and a drop of light oil on the spindle shoulder make future disc changes smoother and help prevent the new nut from seizing on the thread.

Safety

Always unplug the angle grinder from the mains (or remove the plug from the extension lead) before changing discs or working near the flange and guard.
Use the correct factory spanner on the flange nut do not hammer or chisel the nut loose as this can damage the flanges and spindle.
Never overtighten the flange nut; it must be firm, not forced. Overtightening can make disc changes difficult and may damage the disc.
Only use discs that are rated for the grinder's speed and suitable for the material being cut or ground.
Wear suitable eye, ear, hand and dust protection whenever you operate the angle grinder, and ensure the guard is correctly fitted and adjusted.

Report a problem

Tork Craft - Flange Nut Back & Front ( 1/2) Service Kit - Tork Craft - Flange Nut Back & Front ( ...

Product details

Tork Craft Flange Nut Back & Front (1/2) Service Kit For TCAG0115 Angle Grinder

Features

Benefits

Specifications

Extra Information

Pro Tip

Safety

Similar products

Tork Craft - Flange Nut Back & Front ( 1/2) Service Kit - Tork Craft - Flange Nut Back & Front ( ...

Product details

0.0 out of 5

Tork Craft Flange Nut Back & Front (1/2) Service Kit For TCAG0115 Angle Grinder

Features

Benefits

Specifications

Extra Information

Pro Tip

Safety

Similar products