Tork Craft Polisher Needle Bearing For POL05
At a Glance; Compact needle bearing for smooth, high-load support in the Tork Craft POL05 polisher gearbox.
Keep the drive train of your Tork Craft POL05 feeling tight and precise with this genuine needle bearing.
Needle bearings are designed to carry high loads in a compact size, supporting rotating shafts in the gearbox where space is limited but strength and alignment are critical.
When the POL05-13 needle bearing wears out, you will often notice extra play at the pad, increased noise from the head and a harsher feel in the hands.
Replacing it with the correct genuine bearing restores proper support, helping your polisher run smoother, quieter and more confidently on paint, gelcoat and metal surfaces.
Specifications
| Technical |
| Brand | Tork Craft |
| Model No. | POL05-13 |
| Product Type | Polisher Needle Bearing |
| Compatible Tool | Tork Craft POL05 Polisher |
| Bearing Style | Needle Roller Bearing |
| Installation Area | Gearbox / Drive Assembly (See POL05 Parts Diagram) |
| Function | Supports High-Load Rotating Shaft In Compact Space |
| Application | Replacement Of Worn Or Damaged Gearbox Bearing On POL05 |
| Category | Spare Part |
Features
- Genuine Tork Craft needle bearing for the POL05 polisher.
- Designed to support a high-load rotating shaft in the gearbox.
- Needle roller construction for compact size with excellent load capacity.
- Matched to the original POL05 housing and shaft dimensions.
- Precision manufactured for smooth, low-friction operation.
- Supplied under the POL05-13 spare part reference.
Benefits
- Reduces vibration and gearbox harshness caused by a worn bearing.
- Helps the backing pad run truer for a more consistent finish.
- Protects gears, shafts and housings from misalignment and excess movement.
- Extends the working life of the POL05 instead of replacing the whole tool.
- Keeps the machine feeling solid and professional in daily use.
Extra Information
Typical symptoms that a needle bearing needs attention include knocking or rumbling noises from the head, play that you can feel when rocking the pad sideways, or a rough spot when you turn the spindle by hand with the tool unplugged.
Because the bearing carries high loads in a small footprint, it is especially important to replace it as soon as wear becomes noticeable.
The POL05-13 bearing is built specifically for the Tork Craft POL05 polisher, so the internal clearance, width and diameter are all correct for the original design.
Using a genuine bearing helps the gearbox run as intended, which is vital for delivering a smooth, predictable feel on modern clear coats and sensitive surfaces.
Pro Tip
Pro Tip: When changing the POL05-13 needle bearing, always clean out old grease and debris from the gearbox first.
Use proper pullers and press tools to remove and install the bearing without damaging the shaft or housing, then apply fresh, suitable grease before closing the box.
After reassembly, run the POL05 at low speed with no load and listen for a clean, even gear note before putting it back into full-duty work.
Safety
- Always unplug the polisher from the mains before opening the gearbox or working on internal parts.
- Allow the tool to cool down fully before handling gears, bearings and housings.
- Use suitable pullers and press tools when removing and installing needle bearings.
- Ensure all circlips, spacers and covers are correctly refitted before testing.
- Test the POL05 under no load after reassembly and only return it to normal duty once you are satisfied with the sound and feel.
- If you are unsure about mechanical repairs, have the work carried out by a qualified technician or an approved service centre.
