Tork Craft Replacement Drill Bit for Tc17007-3 Mandrel

Pilot DrilPilot Drill Bit for hole saws

Drill Bit Diameter: 6.35mm

Application:
The Drill Bit is a replacement pilot Drill Bit for Diamond coated hole saws.

Replacing the pilot Drill Bit:
- Use an Allen Key (TC17016) or in some cases a slot-Head screwdriver to undo the grub screw securing the pilot Drill Bit in the mandrel.
- Replace the pilot Drill Bit by aligning the flat side on the shank with the grub screw.
- Tighten the grub screw. Make sure the pilot Drill Bit is secured.
- In some cases it would be necessary to remove the hole saw from the mandrel to replace the pilot Drill Bit.

Mandrel replacement pilot Drill Bits:
6.35 x 115mm (extra long) for bi-metal hole saws - TC00001
6.35 x 70mm for bi-metal hole saws - TC00002
Tungsten Carbide Tipped (TCT) series hole saws - TC00003
Carbide Grit hole saws - TC00004
Diamond coated hole saws - TC00006

What's in the box
1x Replacement Drill Bit for TC17007-3 Mandrel