Tork Craft - Router Bit Rabbeting 1/2" - Tork Craft - Router Bit Rabbeting 1/2"

Cutting Depth: 1/2"
Classification: Standard (Yellow)

The Rabbeting Router Bit is an essential joinery tool for woodworkers and cabinetmakers, specifically engineered tocut a precise, step-shaped recessknown as a rabbet or rebatealong the edge or end of a workpiece.

This bit is characterized by an integrated ball-bearing pilot, which rides directly against the edge of yourmaterial to guide the cut, ensuring a consistent and clean shoulder for the rabbet. It is the go-to solution forefficiently creating strong lap joints, cutting the recesses needed for cabinet backs, and producing perfectly sizedinset doors and drawer fronts.

For maximum versatility, many rabbeting bits come as a set with interchangeable bearings of varying diameters,allowing a single bit to quickly and accurately produce multiple rabbet widths and depths to suit the preciserequirements of any joint or decorative molding detail.

Application:

• Router bits are for use with router machines only.
• Be sure that at least 3/4 of the shaft length is inserted into the router collet.
• Do not 'bottom-out' the bit in the collet. The shank should be 1/8' from the bottom of the collet.
• Route in two or more passes when large amounts of stock must be removed.
• Carpenters
• Craftsmen
• Hobbyists
• Woodworking
• DIY