TPMS 50448 2In1 Auto Tire Pressure Monitor Sensor for 50448 TPMS Activation Tool

Need 1x Pcs 9V battery to work(without battery),Set the car in TPMS learning mode. (car horns twice)Starting from the left front tire, the antenna of the dedicated tool for tire pressure monitoring is facing upwards against the tire sidewall near the rim of the valve stem to start the antenna. Press and release the button and wait for the speaker to emit a .Once the speaker is chirping, the sensor information is read and the turn signal to be read at position will light.Follow this order to rest TPMS one by one: Front left, front right, rear right, rear left.After all sensors reset, the car horns twice, the TPMS re-learn finished.for series cars:1. Make the gear in P position.2. Use cruise to choose TPMS re-learn mode in the dashboard settings.3. Horn will ring twice and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped,the message center will display the front left (LF) tire.for series cars:1. Make the gear in P position.2. with the ignition switch to OFF, press and release the brake pedal.3. Turn the ignition switch from the OFF position to the RUN position 3 times and end at RUN position.4. Depress and release the brake pedal.5. Ignition to OFF position.6. Ignition goes from the OFF position to the RUN position 3 times and ends at RUN position.7. Horn will ring once and the TPMS indicator flashes, then the learning mode has been successfully entered. If equipped, the message center will display the front left (LF) tireMaterial:ABScolour:Black+yellowPackage Contents:1 x TPMS 50448 2-in-1 activation tool1 x English manualOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.