Tubing Beader Tool Manual Bead Roller Intake and Intercooler Piping Crimping Tool Fit 5/8in Tubes Al

1. Designed to be mounted in your vise whether mounted on a bench, wall, or floor.(Works best when secured in a .)2. By turning the handle on the side of the tubing crimping tool, you can form the desired crimp on of the aluminum tubing or copper tubing. The detachable handle is specially designed for the user, allowing you to operate it more easily.3. Form a perfect bead on tubes so that rubber or silicone hose can be more securely clamped to them.4. Simply insert of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing(Note: Always apply the bead before welding.)Name: Tubing Beader ToolCondition: Application: Use with 5\/8inch(16mm) or larger ID tubing for proper operation.for Aluminum, Steel, Copper or Stainless Steel Intercooler Pipe.for Wall Thickness of Steel\/Aluminium\/Stainless Steel Tube shouldn't be 0.050inch(1.25mm).Note: No installation guides are included, we highly recommend to professional installation.Material: aluminumcolour: BluePackage Contents: 1 x Tubing Beader ToolOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.