Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09
Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09 Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09

Type-C / 8 Pin Tail Plug Tester Automatically Locks Fault Points, TB-09

New 100 available
R651.07
Want to pay less?
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate
The seller has indicated that they will usually have this item ready to ship within 15 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:
 
Standard Delivery
Main centres:  1-3 business days
Regional areas: 3-4 business days
Remote areas: 3-5 business days
Seller
Get it now, pay later

Product details

Condition
New
Location
South Africa
Product code
11648670
Bob Shop ID
678532809

1. Resolution: 2.99 characters (3.5 digits)
2. PN junction measurement range: 0.00-2.99
3. Charging voltage: 5V
4. Current: 300mA
5. Battery capacity: 250mAh
6. Screen size: 1.77 inch
7. Size: about 7.4 x 3.6 x 1.4cm
8. Weight: about 25g

Features:
1. Supports Type-C/8 Pin device detection for mobile phones and computers
2. Intelligent automatic detection, turn off the mobile phone, press the power button to turn on the product, connect to the tail port of the mobile phone, and the device to be detected will start automatic detection. Press the corresponding interface button of the product to re-test
3. Automatically lock the charging fault point. The instrument can automatically read the diode characteristic value of the corresponding USB interface, and then diagnose and locate the fault problem of the USB interface based on the value
4. High-definition display, small screen with multiple information display, and full view of the measured values ??
5. The instrument does not respond to key operations during the detection process, and automatically shuts down after 2 minutes of no operation
6. The detection value 0.00 indicates a short circuit/OL indicates an open circuit/the detection value is red, indicating that the PN value is abnormal

Add to cart

Similar products