UniQue 4000va (2400w) pure sine wave double conversion inverter, Retail Box , 1 year Limited Warranty
Product Overview
The UniQue 4000va (2400w) pure sine wave double conversion inverter is suitable for both office and home use to provide cleaner and stable backup power to your equipment and appliances. It is recommended to use pure sine wave inverter for sensitive appliances and equipment. This unit can run anything from your TV and computer to fridge and stoves as long as the wattage of the equipment and appliance does not exceed 2400w.
Fully Automated
Once it is installed, it will automatically switch to battery mode when there is a power failure and your more sensitive electronics such as your computer will not switch off or reset. When power is restored the unit will automatically switch back to the mains power and start charging the battery.
Extended power backup time
This unit is designed to provide extended power backup time. The unit does not come with batteries. It uses 24v deep cycle batteries. It is suggested to use batteries that are larger than 100ah. This machine can connect up to 4 batteries. The more batteries you have, the longer the backup time. You can get many hours of backup time depending on the amount of power you use and the amount of batteries you have.
Specification :
Capacity: 4KVA / 2400W
Input
Normal Voltage 220VAC
Voltage Range
¿ Acceptable Voltage Range: 120-275 VAC
¿ Frequency: 50Hz / 60Hz(45Hz - 70Hz)
¿ Line Low Transfer: 120VAC ±2%,60VAC ±2%
¿ Line Low Return: 130VAC ±2%,65VAC ±2%
¿ Line High Transfer: 275VAC ±2%,35 VAC ±2%
¿ Line High Return: 260VAC ±2%,130VAC ±2%
Output
¿ Voltage: 220 VAC (230V or 240VAC re-settable via LCD panel)
¿ Voltage Regulation:(Battery Mode) < 3% RMS for entire battery voltage range
¿ Frequency: 50 Hz or 60 Hz
¿ Frequency Regulation:(Battery Mode) ± 0.1 Hz
¿ Power Factor: 0.6
¿ Waveform: Pure Sine Wave
¿ Efficiency: >75%
Overload Protection
¿ Line Mode: Circuit Breaker
¿ Battery Mode: 110% ~ 150% for 30 sec.
¿ >150% for 200ms
Transfer Time
Typical: < 8ms.
Battery
¿ Battery Voltage: 24VDC
¿ Max. Charging Current:(3steps Selectable) > 50A
Display LCD
¿ LCD: UPS status, I/P&OP Voltage Frequency,
¿ Load%, Battery Voltage & %, Charge current, Temperature
¿ LED: Normal (Green), Warning (Yellow), Fault (Red)
Audible Alarm
¿ Battery Mode: Beeping every 4 seconds
¿ Low Battery: Beeping every second
¿ UPS Fault: Beeping Continuously
¿ Overload: Beeping twice per second
Environment
¿ Operation Temperature: 0-40 degree C; 32-104 degree F
¿ Relative Humidity: 0-95% non-condensing
¿ Audible Noise: Less than 55DBA (at 1M)
