Upgraded DHD 450B 50W 4A Balance Charger For 1-4S LiPo LiFe Battery
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615150993
?DHD 450B 50W 4A Balance Charger For 1-4S LiPo LiFe Battery
Description:
Brand Name: DHD
Item Name: 450B
Working Voltage: DC 11-16V Charging Power: 50W (max) Charging Current: 1A/2A/3A/4A optional Balance Current: 1.5A
Balance Accuracy: 10mV Dimension: 100x58x18mm Weight: 100g
Single Cell Cut-off Voltage: 3.6V (LiFe), 4.2V (LiPo)
Application: Suitable for 1-4S LiPo,LiFe Battery
Charging Current:
1A: For <1000mAh batteries
2A: For 1000mAh - 4000mAh batteries
3A: For 4000mAh - 10000mAh batteries
4A: For >10000mAh batteries
How To Use:
1. Connect the power Please connect the charger to the power supply adapter that matches with the charger. (Input plug specifications: 5.5x2.5mm) ? 2. Select the battery type
(Note: Must be selected before the battery is connected to the charger, it is disabled during charging.) Long press the LiPo / LiFe button for 3 seconds, you can choose LiPo battery charging mode or?LiFe battery mode. Red light - LiPo mode; green light - LiFe mode. ? 3. Select the charging current Short press the LiPo / LiFe button, you can select the charging current, press the button shortly, the charging current indicator moves one gear 2A-3A-4A-1A-2A and cycle. (You can also adjust the charging current during charging) (Note: The charger has a memory function, when the selected battery type and charging current, the next boot defaults to the last set parameters.) ? 4. Charging Insert the battery into the corresponding charging terminal to start charging, during charging, the balance indicator light flashes to indicate charging. When any one of them reaches 4.20V (LiPo) or 3.60V (LiFe), the corresponding LED will be on to indicate it is balancing. ? 5. Charging is completed After the charge is completed, all the balance indicator light will be steady, indicating that the charging is completed and the buzzer will alarm.
? Features:
Upgraded version of 323B, suitable for 1-4s lipo.
Automatically stop when full of charge,easy and safe to use.
Charging current is up to 4A, greatly improve the charging speed.
With charging current indicator and battery cells?status indicator, display charging status.
With imported microcontroller chip and high-current balancing circuit design, high charging efficiency and excellent voltage accuracy.
With multifunctional switch, keep pressing can?cycle switching?charging current, long-press for 2s, can switch?battery types.
Aluminum shell, more solid, good heat dissipation, surface anodizing, firm adhesion, not easy to peel off.
When the input voltage is lower than 10V or higher than 18V,will enter protection state to stop charging, and power indicator flashes quickly and alarm.
With?under-voltage input protection, over-voltage protection, over-current protection and?charging end reminding function.
Note:
Battery and cables are not included.
Never leave the battery when charging.
If the battery temperature is too high, please promptly reduce the charging current.
Package Included:
1x??DHD 450B 50W 4A Balance Charger
?
? ?
, 
, 
, 
Description:
Brand Name: DHD
Item Name: 450B
Working Voltage: DC 11-16V Charging Power: 50W (max) Charging Current: 1A/2A/3A/4A optional Balance Current: 1.5A
Balance Accuracy: 10mV Dimension: 100x58x18mm Weight: 100g
Single Cell Cut-off Voltage: 3.6V (LiFe), 4.2V (LiPo)
Application: Suitable for 1-4S LiPo,LiFe Battery
Charging Current:
1A: For <1000mAh batteries
2A: For 1000mAh - 4000mAh batteries
3A: For 4000mAh - 10000mAh batteries
4A: For >10000mAh batteries
How To Use:
1. Connect the power Please connect the charger to the power supply adapter that matches with the charger. (Input plug specifications: 5.5x2.5mm) ? 2. Select the battery type
(Note: Must be selected before the battery is connected to the charger, it is disabled during charging.) Long press the LiPo / LiFe button for 3 seconds, you can choose LiPo battery charging mode or?LiFe battery mode. Red light - LiPo mode; green light - LiFe mode. ? 3. Select the charging current Short press the LiPo / LiFe button, you can select the charging current, press the button shortly, the charging current indicator moves one gear 2A-3A-4A-1A-2A and cycle. (You can also adjust the charging current during charging) (Note: The charger has a memory function, when the selected battery type and charging current, the next boot defaults to the last set parameters.) ? 4. Charging Insert the battery into the corresponding charging terminal to start charging, during charging, the balance indicator light flashes to indicate charging. When any one of them reaches 4.20V (LiPo) or 3.60V (LiFe), the corresponding LED will be on to indicate it is balancing. ? 5. Charging is completed After the charge is completed, all the balance indicator light will be steady, indicating that the charging is completed and the buzzer will alarm.
? Features:
Upgraded version of 323B, suitable for 1-4s lipo.
Automatically stop when full of charge,easy and safe to use.
Charging current is up to 4A, greatly improve the charging speed.
With charging current indicator and battery cells?status indicator, display charging status.
With imported microcontroller chip and high-current balancing circuit design, high charging efficiency and excellent voltage accuracy.
With multifunctional switch, keep pressing can?cycle switching?charging current, long-press for 2s, can switch?battery types.
Aluminum shell, more solid, good heat dissipation, surface anodizing, firm adhesion, not easy to peel off.
When the input voltage is lower than 10V or higher than 18V,will enter protection state to stop charging, and power indicator flashes quickly and alarm.
With?under-voltage input protection, over-voltage protection, over-current protection and?charging end reminding function.
Note:
Battery and cables are not included.
Never leave the battery when charging.
If the battery temperature is too high, please promptly reduce the charging current.
Package Included:
1x??DHD 450B 50W 4A Balance Charger
?
? ?
, , ,