URETHANE O-RINGS FOR PAINTBALL TANK VALVE - 10's

Product Description

• DurabilityStandard fill o-ring,resistant to high temperature and corrosion, durable for use.
• Air tightnessPolyurethane O-rings gives you perfect airtight performance to prevent gas leakage.
• Scope of useSuitable for your tank with all sizes, works with Co2, air.
• SizePolyurethane O-rings diameter is 13.8mm, thickness is 1.9mm.Suitable for valve with similar size.
• Widely usedPolyurethane O-rings can be use in paintball, airsoft, air guns,CO2 air tank and more.

Some helpful tips to make your o-rings last longer

• Put a very light coat of synthetic marker oil or grease on the o-ring periodically for a better seal and less friction.
• When removing your tank, do not simply unscrew the tank from the ASA - we recommend threading the tank off until you hear the gas bleeding through the tiny hole at the bottom of the ASA. Once bled, then you can thread the tank off, which will cause no sudden pressure damage on your O-ring. Otherwise, you might find that your fitted O-ring, after some time, will appear ruptured or elongated beyond its ability to return to its original dimensions.
  

Product Specfications

• 10x Paintball Gun CO2/AIR Tank Urethane O-rings
• They do the job just fine
• Quantity:10-rings
• Material: Urethane
• Dimensions;
  OD: .7" (17.8mm)
  Cross-section ø: .075" (1.92mm)

If you're unsure as to how to replace these O-rings, feel free to have a look at the video hereunder;