"product properties:
● Input voltage range AC100-240V. Wide voltage input, in line with global use standards.
●. Input voltage frequency: 50-60Hz.
●. Output voltage range: 3.2V (or optional 3.7V charge 4.2V phosphor charger (selected when ordering))
●. Output current range: 1000 mA
●. Output voltage adjustment rate: 5%
●. Termination charging voltage: 3.7V 1%
● Output ripple & noise 100mVp-p. DC ripple is small, high work efficiency, low temperature, long service life,
●.Working efficiency 80-85%. Low power consumption design, no-load power consumption is small
● Output short circuit protection. Built-in overcurrent. Overvoltage protection
●. Working temperature 0 °C ~ +50 °C.
●. Storage temperature -20 ° C ~ +85 ° C.
● Humidity 10%-95%RH
● The product is 100% full load aging. "
"Main electrical performance:
* With the latest optimization scheme, it has perfect protection function;
* When the polarity of the battery is reversed, the output current will be cut off;
* When the battery is placed in the battery compartment without charging, only the green light is left, and the other reverse discharge circuits are cut off;
* In addition to the above protective measures, there is also a built-in fuse for final protection;
* The whole machine no-load power consumption (after full charge or connected to the market but no battery) is only about 300mW;
* Charging mode: constant current - constant pressure - charging;
Constant current is to speed up the charging speed. The constant voltage is that the output voltage of the charger will never be higher than the highest voltage of the battery (so there will be no overcharge);
The battery can be charged to a deep saturation.
* For battery over-discharge without protective plate, it has self-arterial charge repair function (only for trial repair, try to avoid over-discharge. The faster the battery is charged after over-discharge, the repair machine
Will be bigger), the repair process is about 10 to 30 minutes (the indicator light is green), after successful repair, it will be transferred to the normal state of charge (red light);
* The working status is clear at a glance:
Put the battery when the input power is not connected. If the battery performance is basically normal, and the polarity is correct and the contact is good, it is "green light"; if the battery is damaged (including
Put), the polarity is reversed, the contact is bad, the light is not bright;
Charging - "red light is on", full - green light is on (red light off)"
" Product advantages:
● Adopt energy-saving IC chip, with perfect protection function, short circuit, overload, over current, over voltage protection, etc., CE FCC C-TICK certificate, in line with UL GS KCPSE standard.
●. Good anti-interference performance and high reliability.
●. DC ripple is small and work efficiency is high.
●. Low operating temperature and long service life.
● The input voltage range is wide, (90-264V) is in line with global usage standards.
●. Good insulation performance and high electric strength.
● With short circuit, overload, over voltage protection.
●. Full load high temperature burning machine, 100% aging test"
"Instructions for use:
1. Try to avoid using it outdoors or in harsh environments to prevent the adapter from being exposed to the sun or getting wet.
2. When you are not using the adapter, unplug the power cord. Because long-term power-on will keep the adapter working, which will affect the final service life.
3. Although the adapter is a wide-band operating voltage, it can be marked from 100V to 264V, but if it is used under extremely unstable voltage, it will also cause damage to the power adapter.
4. Connect to the mains, the charger lights up in green.
5. Insert 32650/26650/18730/18650/16730/16650 into the slot of the charger according to the diagram in the battery compartment. The corresponding LED red light is on, indicating normal charging; when fully charged, the red light is off, green light Lights up, indicating that the battery is fully charged and ready for use. The battery is anti-reverse and can't be charged. If it is reversed, please correct it immediately.
"
"Notes: 1. Indoor use, it is forbidden to use in high temperature, humidity, high magnetic field environment, please do not expose it to rain or 2, it is forbidden to charge the leakage battery to avoid the liquid flowing into the charger and damage the charger. Charge expired batteries and fake and shoddy batteries.
3. Do not disassemble the charger by yourself, or touch the inside of the charger with a metal object to avoid electric shock.
4. If the battery is found to be aging after being repeatedly charged and re-charged several times, it is proved that the battery is aging, please replace the battery.
5. This charger is a professional charger for lithium batteries. It can not be used for charging other batteries. If other types of batteries are charged, it may cause explosion, battery rupture or liquid leakage, personal injury or property damage to avoid accidents. The consequences are at your own risk.
6. Do not let the charger land or place heavy objects on it.
7, do not charge near the crowd life.
8. Children should use this charger under the supervision of an adult.
9. Use this charger within the temperature range of 0 °C ~ 40 °C. "
Storage: The charger should be stored in an indoor temperature of -10 ° C ~ 50 ° C, clean, dry and ventilated indoors, should avoid contact with corrosive traits, should be away from fire and heat sources.
Scope of application: 32650/26650/18650/16650 lithium iron phosphate battery
| General |
|---|
| Model | 26650 |
| Quantity | 1 piece |
| Material | plastic |
| Charger |
|---|
| Charging Cell Type | Lithium Ion |
| Charging Battery Type | 32650/16650 , 18650 , 26650 |
| Rechargeable Battery Qty | 1 |
| Target Country & Region | US plug |
| Built-in Protected Circuit | Yes |
| Input Voltage | AC100-240V |
| Output Voltage | 3.2V |
| Max. Output Current | 1000mA |
| Fast Charging Function | No |
| LCD Screen | No |
| Auto Circuit Detection | Yes |
| Indicator | Red light charging Green light is charged |
| Over Voltage Protection | Yes |
| Short-Circuit Protection | Yes |
| Over-Charging Protection | Yes |
| Over-Discharging Protection | Yes |
