This item has closed with no items sold
View other items offered by BeeConnections1050

Similar products

USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered
USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered
Closed

USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered

New 10 were available
R358.00
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate
The seller has indicated that they will usually have this item ready to ship within 15 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:
 
Standard Delivery
Main centres:  1-3 business days
Regional areas: 3-4 business days
Remote areas: 3-5 business days
Buyer protection
Returns
Replacement Guarantee: 7 Days: We stand by this guarantee
Get it now, pay later

Product details

Condition
New
Location
International
Product code
TBD06037471
Bob Shop ID
685748185
Selected model / variant: USB 2.0 9pin To 4 9pin Hub Internal Motherboard Header With 4pin Powered

1. Purpose: There are more and more USB devices now. When the USB ports on the chassis are not enough, you can use this device to directly convert the 9PIN interface on the board into four 9PIN interfaces, and transfer them to the USB on the front panel, so that Provides a front USB interface, very convenient.
2. Add an external IDE large 4pin power supply interface, increase the USB power supply current, and use high-power devices without pressure
3. The expansion card is equipped with an adhesive pad at the bottom, which can be glued inside the chassis for fixed use
4. Using Terminus FE2.1 master control, fast speed and good compatibility
5. Hardware requirements: a motherboard supporting USB2.0 9PIN
Don't miss out on the latest deals!