USB GPS Receiver for Computers (Laptop, Netbook, Desktop PC)

USB GPS Receiver for Computers (Laptop, Netbook, Desktop PC)

This USB GPS Receiver for Computers is a compact, accurate GPS receiver with low power consumption that works directly from your computer's USB port and does not require user initialization or external power. All you need to do is plug it into the USB port of your laptop or netbook and install the GPS navigation software of your choice and you're good to go! This USB GPS receiver performs even better than car-dedicated GPS units or handhelds as the magnetic base of the antenna allows it to be securely positioned wherever you find the best view of the sky (and hence best reception) or even placed on the outside of the vehicle.
This USB GPS receiver incorporates the latest SiRF Star III GPS chipset and a built-in patch antenna so you receive a high degree of GPS accuracy and performance even at low signal levels. Data output by this GPS receiver include latitude, longitude, altitude, velocity, satellite and receiver status and to ensure up-to-the-second accuracy, the receiver tracks up to 20 satellites at a time, re-acquires satellite signals in about 100 milliseconds and updates position data every second.

**This model is compatible with most brands of GPS software - however hardware specific software such as Garmin may not run on this unit. We provide the GPS-enabled hardware only, not the software. We provide no warranty or customer support regarding GPS software. We cannot provide downloads / links / advice regarding GPS software. Any software installation you undertake should be performed or supervised by a professional.

Manufacturer Specifications

• Primary Function: USB GPS receiver
• GPS Chipset: SiRF Star III
• Satellite Tracking: Tracks up to 20 satellites
• Receiver: L1, C/A code
• Max update rate: 1 HZ
• Acquisition time:
  Reacquisition: 0.1 sec average
  Hot start: 1 sec
  Warm start: 38 sec
  Cold start: 42 sec
• Position Accuracy
  Non DGPS (Differential GPS):
  Position: 5-25 meter CEP without SA
  Velocity: 0.1 meters/second, without SA
  Time: 1 microsecond synchronized GPS time
• EGNOS/WAAS:
  Position:
  < 2.2m, horizontal: 95% of the time
  < 5m, vertical: 95% of the time
• Dynamic Conditions:
  Altitude: 18,000 meters (60,000 feet) max
  Velocity: 515 meters/second (700 knots) max
  Acceleration: 4 G, max
• Antenna Type: Built in Patch Antenna
• Minimum signal tracked: -159dBm
• Operating temperature: -40 to +80
• Storage temperature: -45 to +100
• Operating humidity: 5% to 95% No condensing
• Power consumption: < 80mA at 4.5- 5.5V input
• NMEA output protocol: 0183 V3.0
• Baud rate: 4800 bps
  Data bit: 8
  Parity: N
  Stop bit: 1
• Interface: USB port
• Supported Operating Systems: Mac, Windows 98SE / ME / 2000 / XP (32 & 64 bit) / Vista (32 & 64 bit) / Windows 7 (32 & 64 bit). NOTE: For Windows 7, please use RC build 7100 or above.

Product Notes

• Low power consumption GPS device
• Utilized in a variety of applications that require a magnetic mounting
• Support NMEA 0183 v3.0 data protocol
• An internal rechargeable Lithium-ion battery sustains the internal clock and memory and is recharged during normal operation
• Fast acquisition and reacquisition times
• Plug and Play function
  

Package Contents

• USB GPS Receiver
• CD with Software Drivers and Manual

Frequently Asked Questions

• Can I just plug this USB GPS receiver into my laptop and start using GPS right away?
  In addition to this USB dongle, you will also need to install GPS navigation software (not included) on your computer. Once your computer has GPS software, then you are ready to plug in this GPS receiver and start using it.
• What GPS navigation software will work with this USB GPS receiver?
  This USB GPS receiver should be compatible with mapping software like Microsoft Streets and Trips, Fugawi, Mapking, National Geographic TOPO!, iGuidance, and most other software that support NMEA data protocol. However, this product does not come with GPS software and we do not provide support or recommendations regarding software for it.
• Why can't I find any signal or satellites?
  If it is your first time using this USB GPS receiver, then it will take about 42 seconds (cold start of 42 seconds) to attempt to locate and then calculate a GPS lock. Data acquisition will become faster with more use.
• Will the magnetic base harm my electronics?
  Absolutely not. The USB GPS receiver's magnet will not interfere with any electronic devices.

Click on this to see the rest of my listings!