USB-powered Lab for Two Channel Oscilloscope, Spectrum Analyser, Recorder, Function Ge (Local Stock)

Overview

A complete USB-powered lab-in-a-box ! Feature-packed PcLab2000-LT software fortwo channel oscilloscope, spectrum analyser, transient recorder, function-generator and bode plotter. With the generator, you can create your ownwaveforms using the integrated signal Iwave editor. For automatedmeasurements, it is even possible to generate wave sequences, using file orcomputer RS232 input.

Features

Function Generator :

• Crystal-based Stability
• Standard Waveforms: Sine, Square And Triangle
• Predefined Library Waveforms Included: Sine(x)/x, Dcv, Sweep, ...

Oscilloscope :

• Auto Set-up Function And X10 Option
• Pre-trigger Function
• Readouts: True Rms, Dbv, Dbm, P To P, Duty Cycle, Frequency…

Transient Recorder :

• Automatic Storage Of Data
• Automatic Recording For More Than 1 Year
• Record And Display Of Screens

Bode Plotter :

• Automated Sync Between Oscilloscope And Generator
• Logatithmic Scale Option
• Volt Or Db Display Scale
• Phase Plot Option

Spectrum Analyser :

• Linear Or Logarithmic Timescale
• Operating Principle: Fft (fast Fourier Transform)
• Fft Input Channel: Ch1 Or Ch2
• Zoom Function

In The Box:

• Getting Started Manual
• Usb Pc Scope + Generator Unit
• Usb Cable
• Software On Cd
• 1 X 60mhz Scope Probe (probe60s)
• Bnc Adapter, Bnc Male To Rca Female (cbnc15)

Specifications

General:

• Markers For: Amplitude/Voltage And Frequency/Time
• Input Coupling: DC, AC And GND
• Supply From Usb Port (500ma)
• Dimensions: 205 X 55 X 175 / 8.2 X 2.2 X 7"

Function Generator:

• Amplitude Range: 100mvpp To 10vpp @ 1khz// 600ohm Load / 0v Offset
• Offset: From 0 To -5v Or +5v Max. (resolution 0.4% Of Full Scale)
• Vertical Resolution: 8 Bits
• Square Wave Rise/fall Time: 0.2µs
• Sample Rate: 12.5mhz
• Typical Sine Wave Distortion (thd): < 1%
• Output Impedance: 50ohm
• Frequency Range: From 0.005hz To 500khz

Oscilloscope: * Bandwidth: Two Channels Dc To 12 Mhz ±3db * Input Impedance: 1Mohm / 30pf * Maximum Input Voltage: 30v (ac + Dc) * Time Base: 0.1µs To 500msPer Division * Input Range: 10mv To 3v/division * Input Sensitivity: 0.3mvDisplay Resolution * Record Length: 4k Samples / Channel * Sampling Frequency:250hz To 25mhz * Transient Recorder: * timescale: 20ms/Div to 2000s/Div * maxrecord time: 9.4hour/screen * max. number of samples: 100/s * min. number ofsamples: 1 sample/20s

Bode Plotter:

• Voltage Range: 10mV, 30mV, 0.1V, 0.3V, 1V, 3V
• Frequency Range: 1kHz , 10kHz, 100kHz, 500kHz
• Frequency Start: 10Hz, 100Hz, 1kHz, 10kHz

Spectrum Analyser:

• Frequency Range: 0 .. 120Hz to 12MHz
• FFT resolution: 2048 lines

Minimum System Requirements:

• IBM compatible PC
• Windows™ 2000, XP, Vista *
• SVGA display card (min.1024 x 768)
• mouse
• free USB port 1.1 or 2.0
• CD Rom player

View More Products