Vantec M.2 NVMe and M.2 SATA SSD PCIe x4 Adapter
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 1 business day. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
South Africa
Product code
VANTEC UGT-M2PC200 ADP
Bob Shop ID
612418502
The M.2 NVMe + M.2 SATA SSD PCIe x4 Adapter is a unique product with 2 very different M.2 Slot. It can offer the fastest boot or data access thru the NVMe SSD and at the same time provide very fast storage through the M.2 SATA SSD. It provides the link between PCIe 4 lanes of data path straight to the NVMe SSD resulting in super-fast data transfer and another M.2 interface for your M.2 SATA SSD. This adapter allows for flexible installation of an M.2 (NGFF) of different size like 42, 60, or 80mm in length with varying capacity. This M.2 adapter will give you the best performance possible for your system.
Features:
Support 2 x M.2 interface, One for NVMe SSD and One for SATA SSD
Primary M.2 for PCIe based (NVMe or AHCI) SSD to PCIe x4 slot
Secondary M.2 for SATA SSD to the System main board SATA port
PCIE to M.2 SSD (M-Key), SATA to M.2 SSD (B-Key)
Support different length M.2 (NGFF) card, 22x42mm, 22x60mm or 22x80mm
Adapter supports PCI Express v3.0 Specs and compatible with v2.0 / v1.0
Supports system boards with PCIe x4,x8,x16 slots
Uses minimum power from PCIe 3.3V for better power management
Low Profile Bracket included
Features:
Support 2 x M.2 interface, One for NVMe SSD and One for SATA SSD
Primary M.2 for PCIe based (NVMe or AHCI) SSD to PCIe x4 slot
Secondary M.2 for SATA SSD to the System main board SATA port
PCIE to M.2 SSD (M-Key), SATA to M.2 SSD (B-Key)
Support different length M.2 (NGFF) card, 22x42mm, 22x60mm or 22x80mm
Adapter supports PCI Express v3.0 Specs and compatible with v2.0 / v1.0
Supports system boards with PCIe x4,x8,x16 slots
Uses minimum power from PCIe 3.3V for better power management
Low Profile Bracket included