Victron Blue Smart IP67 12/17 230V CEE 7/7 Battery Charger
Check my rate
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Product information
The battery is charged, smartly to perfect condition
The seven-step charging algorithm gets the best out of your battery. The charger gives the battery the power it needs, maintains its health, ensures better performance, and longer life.
Recovery of deeply-discharged 'dead' batteries
Unlike other brands, the Blue Smart IP67 Charger Waterproof will attempt to recharge a deeply-discharged battery by force-feeding it with a low current. Normal charging will then be resumed as soon as there is sufficient voltage across the battery terminals.
Check the status of your battery remotely
Blue Smart IP67 Charger Waterproof is equipped with built-in Bluetooth, so the status of the charger and the battery can be checked on a smartphone, tablet, or laptop. All settings of the charger can be configured with the VictronConnect app.
The Blue Smart IP67 Charger is the wireless solution to monitor voltage and current, to change settings and to update
the charger when new features become available.
With Bluetooth, the functionality of the IP67 charger is enhanced and is similar to that of our IP22 and IP65 chargers.
Water, oil, or dirt will not damage the Blue Smart IP67 Charger. The casing is made of cast aluminum and the
electronics are molded in resin.
Setting a new industry standard: with 92% efficiency or better, these chargers waste three to four times less heat.
And once the battery is fully charged, power consumption reduces to less than a Watt, some five to ten times better
then the industry standard.
The Blue Smart Charger features a microprocessor-controlled 'adaptive' battery management. The 'adaptive' feature
will automatically optimize the charging process relative to the way the battery is being used.
The storage mode kicks in whenever the battery has not been subjected to discharge for 24 hours. In the storage
mode, float voltage is reduced to 2,2 V/cell (13,2 V for a 12 V battery) to minimize gassing and corrosion of the positive
plates. Once a week the voltage is raised back to the absorption level to 'equalize' the battery. This feature prevents
stratification of the electrolyte and sulphation, a major cause of early battery failure.
LiFePO batteries are charged with a simple bulk absorption float algorithm.
It can be used in a hot environment such as a machine room. Output current will reduce as the temperature increases up to
60C, but the charger will not fail.
Yellow LED: bulk charge (blinking fast), absorption (blinking slow), float (solid), storage (off)
Green LED: power on