Waterfall Submersible / Inline 700 L/H Pond or Fountain Flow Water Pump

Waterfall Submersible / Inline Flow Water Pump 700 L/H Waterfall Flow Pumps produces super large flow, ideal for moving large volumes of water through filtration systems or creating a stream or waterfall and is suitable for both submersible pond and in-line on land use. The vortex impeller is efficient & energy saving. The ceramic bearing & shaft provides longer pump life-span with better corrosion resistance. The simple 'no-tool' clip together design makes it easy to disassemble / assemble the inlet housing cover quickly & conveniently. Built-in thermal overload switch has a self-resetting feature to ensure safe operation of the pump, even in strenuous conditions. The unique outer housing design alleviates blockages and the pump has a built-in filter. The pump also has an adjustable flow control feature to allow less water than the maximum to be pumped, should this be required. For in-line on land use, disassemble the inlet housing and fit the supplied threaded fitting to the pump inlet. The pump Does Not have suction / lift capability which means it needs to be installed below the level of the water and then flooded for it to be used in in-line on land mode. Features: - Continuous Duty - Salt & Fresh Water - Koi & Pond Safe - Adjustable Flow Rate - Built in Filter - Suitable for both Indoor & Outdoor Use - Eco-design motor set to run at maximum efficiency - Long Life Vortex Impeller - Thermal Overload Protection Max Head / Water Cut-Off Height is at 1.2m. Please refer to the supplied Height / Flow Chart to determine the flow capabilities of the pump. Specifications: - Voltage: 220 - 240 V at 50Hz - Power: 10W - Max Head / Water Cut-Off Height: 1.2m - Cable Length: 1.8m