| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Overview:
This is an E-Ink raw display, 1.02inch, 12880 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
Features:
No backlight, keeps displaying last content for a long time even when power down
Ultra low power consumption, basically power is only required for refreshing
Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications:
Operating voltage: 3.3V
Interface: 3-wire SPI, 4-wire SPI
Outline dimension: 32.6mm 18.6mm
Display size: 21.76mm 14mm
Dot pitch: 0.175 0.17
Resolution: 128 80
Display color: black, white
Grey scale: 2
Full refresh time: 2s
Refresh power: 26.4mW(typ.)
Standby power: <0.017mW
Viewing angle: >170ﾣ
PIN Function:
VCC: 3.3V/5V power input
GND: power ground
DIN: SPI communication M0SI pin
CLK: SPI communication SCK pin
CS: SPI chip select pin (active low)
DC: data/command control pin (high level indicates data, low level indicates command)
RST: External reset pin (low level reset)
BUSY: Busy output pin (meanslow level busy)
Documents:
Package includes:
With driver board:
1 x 1.02inch display
1 x 8pin dupont cable
