Waveshare 5 inch HDMI LCD (G) 800x480 Supports Various Systems Resistive Touch HD Display Screen B
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615114179
Documents:
Features:
800x480 hardware resolution, configurable by software. Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, single touch, and driver free. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. It has a 3.5mm audio jack and supports HDMI audio output Supports VGA input (specific cable is required and should be purchase separately)
Note:
Limited by the game console OS, the touch function is unavailable. Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack.
FAQ:
Q1: Why the LCD doesn`t work with my Raspbian? A: To use the LCD with the Raspberry Pi official image, driver (SPI touch interface only) should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our image directly (if provided). Q2: Why the LCD still doesn`t work with the Waveshare provided image? A: Make sure the hardware connection is correct and connects fine. Make sure the image in TF card is burnt correctly. The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, if both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Q3: Which power supply should I use? It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC`s USB port might have not enough power. For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD. For more info, please check the wiki page.?
Package includes:
1 x 5inch HDMI LCD (G) 1 x HDM1 cable 1 x HDMl female to micro HDMI male adapter 1 x USB cable type-A male port to micro male port 1 x Resistive touch pen 1 x RPi copper pillar package (4PCS set)
Features:
800x480 hardware resolution, configurable by software. Used with Raspberry Pi, supports Raspbian, Ubuntu, WIN 10 IoT, single touch, and driver free. Multi-languages OSD menu, for power management, brightness/contrast adjustment, etc. It has a 3.5mm audio jack and supports HDMI audio output Supports VGA input (specific cable is required and should be purchase separately)
Note:
Limited by the game console OS, the touch function is unavailable. Sound support means, it is possible for the game console to output sound signal via LCD embedded speaker, external speaker interface, or earphone jack.
FAQ:
Q1: Why the LCD doesn`t work with my Raspbian? A: To use the LCD with the Raspberry Pi official image, driver (SPI touch interface only) should be installed first. Please refer to the user manual. However, for the first testing, you may want to use our image directly (if provided). Q2: Why the LCD still doesn`t work with the Waveshare provided image? A: Make sure the hardware connection is correct and connects fine. Make sure the image in TF card is burnt correctly. The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, if both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact. Q3: Which power supply should I use? It is recommended to use a 5V/3A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC`s USB port might have not enough power. For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD. For more info, please check the wiki page.?
Package includes:
1 x 5inch HDMI LCD (G) 1 x HDM1 cable 1 x HDMl female to micro HDMI male adapter 1 x USB cable type-A male port to micro male port 1 x Resistive touch pen 1 x RPi copper pillar package (4PCS set)
