Waveshare BME280 Environmental Sensor Expansion Board Module Temperature/Humidity/Air Pressure
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615106822
Documents:
Overview:
A tiny sensor with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels. Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental Sensor is suited for applications such as environment monitoring, weather forecast, altimeter, and IoT projects, and so on.
Features:
Supports I2C (default), configurable slave address Supports SPI, switch to SPI via I/O setting Onboard voltage level translator, compatible with 3.3V/5V operating voltage
Specifications:
Operating voltage: 3.3V/5V Communication interface: I2C/SPI Temperature sensing: -40~85?ﾣC (resolution 0.01?ﾣC, accuracy ±1?ﾣC) Humidity sensing: 0~100%RH (resolution 0.008%RH, accuracy ±3%RH, response time 1s, delay a???2%RH) Barometric pressure sensing: 300~1100 hPa (resolution 0.18Pa, accuracy ±1hPa) Power consumption: <0.1mA@1Hz (H,P,T) Dimension: 27mm x 20mm Mounting hole size: 2.0mm
Pinouts:
Package includes:
1 x?BME280 Environmental Sensor
Overview:
A tiny sensor with BME280 onboard, sensing environmental temperature, humidity, and barometric pressure. It supports both I2C and SPI interfaces, also is compatible with 3.3V/5V voltage levels. Due to its ultra small form factor, low power consumption, high precision with stability, the BME280 Environmental Sensor is suited for applications such as environment monitoring, weather forecast, altimeter, and IoT projects, and so on.
Features:
Supports I2C (default), configurable slave address Supports SPI, switch to SPI via I/O setting Onboard voltage level translator, compatible with 3.3V/5V operating voltage
Specifications:
Operating voltage: 3.3V/5V Communication interface: I2C/SPI Temperature sensing: -40~85?ﾣC (resolution 0.01?ﾣC, accuracy ±1?ﾣC) Humidity sensing: 0~100%RH (resolution 0.008%RH, accuracy ±3%RH, response time 1s, delay a???2%RH) Barometric pressure sensing: 300~1100 hPa (resolution 0.18Pa, accuracy ±1hPa) Power consumption: <0.1mA@1Hz (H,P,T) Dimension: 27mm x 20mm Mounting hole size: 2.0mm
Pinouts:
| PIN | I2C | SPI |
| VCC | 3.3V/5V power supply | |
| GND | Ground | |
| SDA/MOSI | I2C data | SPI data master output/slave input |
| SCL/SCK | I2C clock | SPI clock input |
| ADDR/MISO | I2C address chip selection,?high level (default) address: 0x77; low level address: 0x76 | SPI data master input/slave output |
| CS | NC | SPI chip selection, low active |
Package includes:
1 x?BME280 Environmental Sensor
