Wavlink ST334U SSD Dual Bay External Hard Drive Docking Station USB 3.0 to SATA I/II/III(AU Plug)
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
SYA002323201D
Bob Shop ID
595624725
1. Supports USB 3.0 external, SATA-III internal. Works great with 2.5 inch and 3.5 inch SATA HDD/SSD USB 3.0 super speed supports UASP for even faster data transfers.
2. SuperSpeed USB3.0 interfaces with data transfer rates up to 5Gbps. 10 times faster than USB2.0, backward compatible with USB2.0 and 1.1
3. Built-in Power Control Switch. Highly efficient (12V, 3A), stable and reliable DC power source a steady supply of energy. Automatic sleep mode after 30 minutes of inactivity saves energy.
4. Tool-free installation on Windows Vista / 7 / 8 / 10, Mac OS X 10.2 to 10.10, Support hot-swapping and easy set up.
5. Package Includes: 1x USB 3.0 HDD SATA Docking Station, 1x USB USB 3.0 Cable, 1x 12V/3A Power Adapter, 1x Manual
Supports 2.5 & 3.5 inch SATA (SATA I/ II/ III) HDD and SSD
Support 2 x 12TB Hard Drive
Super speed up to 6GB/s with UASP protocol
Support backup and offline clone function
Tool-free, no driver needed. Hot-swappable, plug and play
LED: Powerx1 HDDx2 Clonex4
Chipset: JMS561U
Attention
1. Please make sure that there are not any bad sectors on the drives in use, to avoid data transfer errors, overheating and damage to the station.
2. Please check if the capacity of Target disk is larger or equivalent to that of Source disk.
3. Do not insert or withdraw HDD or SSD when another hard drive running.
4. Please backup files in the target hard drive before cloning. Any files in target hard drive will be overwritten when offline cloning occurs.
5. To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the docking station before removing.
2. SuperSpeed USB3.0 interfaces with data transfer rates up to 5Gbps. 10 times faster than USB2.0, backward compatible with USB2.0 and 1.1
3. Built-in Power Control Switch. Highly efficient (12V, 3A), stable and reliable DC power source a steady supply of energy. Automatic sleep mode after 30 minutes of inactivity saves energy.
4. Tool-free installation on Windows Vista / 7 / 8 / 10, Mac OS X 10.2 to 10.10, Support hot-swapping and easy set up.
5. Package Includes: 1x USB 3.0 HDD SATA Docking Station, 1x USB USB 3.0 Cable, 1x 12V/3A Power Adapter, 1x Manual
Supports 2.5 & 3.5 inch SATA (SATA I/ II/ III) HDD and SSD
Support 2 x 12TB Hard Drive
Super speed up to 6GB/s with UASP protocol
Support backup and offline clone function
Tool-free, no driver needed. Hot-swappable, plug and play
LED: Powerx1 HDDx2 Clonex4
Chipset: JMS561U
Attention
1. Please make sure that there are not any bad sectors on the drives in use, to avoid data transfer errors, overheating and damage to the station.
2. Please check if the capacity of Target disk is larger or equivalent to that of Source disk.
3. Do not insert or withdraw HDD or SSD when another hard drive running.
4. Please backup files in the target hard drive before cloning. Any files in target hard drive will be overwritten when offline cloning occurs.
5. To avoid data loss, do not remove or insert drives when one drive is working in the docking station. Please power off the docking station before removing.