WiFi 2000W Solar Micro Inverter

Product Introduction.
* Rapid shutdown function
* IP67 protection degree, 10 years warranty
* PLC, Zigbee or WIFI communication
* 4 MPP trackers, module level monitoring
* Max. DC input current of 12.5A, adapt to 600W PV module

Microinverter System Introduction
The Microinverter is used in utility-interactive grid-tied applications, comprised of two key elements:
* Microinverter
* Router

Note:If the wireless signal in the area where the microinverter is weak, it is necessary to add a wifi signal booster at a suitable place between the router and the microinverter.

This integrated system improves safety; maximizes solar energy harvest;increases system reliability, and simplifies solar system design, installation,maintenance, and management.

Microinverters Maximize PV Energy Production:
Each PV module has individual Maximum Peak Power Tracking (MPPT) controls, which ensures that the maximum power is exported to the utility grid regardless of the performance of the other PV modules in the array.When PV modules in the array are affected by shade, dust, orientation,or any situation in which one module underperforms compared with the other units, the Microinverter ensures top performance from the array by maximizing the performance of each module within the array.

More Reliable than Centralized or String Inverters:
The distributed Microinverter system ensures that no single point of system failure exists across the PV system.Microinverters are designed to operate at full power at ambient outdoor temperatures of up to 149 (65). The inverter housing is designed for outdoor installation and complies with the IP65 environmental enclosure rating.

Simple to Install:
You can install individual PV modules in any combination of Module quantity, orientation, different type and power rate The Ground wire (PE) of the AC cable is connected to the chassis inside of the Microinverter,potentially eliminating the installation of grounding wire (check local regulation). Data collection adopts internal wifi,wireless router is needed near the microinverter. When complete the installation of microinverter,configure wireless router with internal wifi(refer to the wifi user manual).The data will be uploaded automatically.Users can monitor and manage the microinverter through corresponding website or APP.

Microinverter Introduction:
The Microinverters connect with the single-phase grid, and can also use multiple Micro inverters in the form of single-phase grid to achieve three-phase grid.

Product Paramenters