WiFi Dongle - Nano USB

Specially manufactured by ModMyPi for the Raspberry Pi this plug and play wireless USB 11N nano wifi dongle will get your Raspberry Pi hooked up to the internet wirelessly within seconds! The unit uses the plug and play Ralink RT5370 Chipset which requires no set up or installation on Raspian XBMC or OpenElec and features an integrated micro antenna to give you clear and constant WiFi signal.Unlike ordinary wireless networking technologies that are confused by signal reflections the 802.11n¿¿s MIMO (Multi Input Multi Output) actually uses these reflections to increase 4 times range of 802.11g and reduce dead spots in the wireless coverage area. It complies highly with IEEE802.11g/IEEE802.11b standard but when both ends of the wireless link are Wireless-N the speed can be increased even 3 times of 802.11g by using twice as much radio band.This nano WiFi dongle utilises the Ralink 5370 Chipset.FeaturesTiny Nano Dongle!Can be powered direct from the Raspberry Pi or from a powered hub.Tested for Compatibility with the Raspberry PiComplies with IEEE 802.11n (Draft 2.0) IEEE 802.11g IEEE 802.11b standardsProvides USBv2.0 portProvides max. 150Mbps receiving rate and 150Mbps sending rateSupports 20MHz/40MHz frequency widthSupports AP modeAuto-detects and changes network transmission rateProvides two work modes Infrastructure and Ad-HocSupports PSP WII and NDS connecting to Internet and Xlink KaiSupports 64/128-bit WEP WPA/WPA2 encryption methods and 802.1x authentication standardsSupports WPS (Wi-Fi Protected Setup) encryption method to free you from remembering long passwordsSupports WMM to make your voice and video more smoothStorage Humidity 5% ~ 90% RH non-condensingOperating Humidity 10% ~90% RH non-condensingSensitivity 68dbm(N mode150M rich value)70dbm(G mode 54M)88dbm(B mode 1M)EVM 68dbmTransmission Power 15dbmFrequency Range 2.4MHzIEEE 802.11 Standards Supported 11b11g11n