WiFi Router Signal Repeater, Amplifier, Wireless-N Extender, Transponder. Collections are allowed.
Price: R395.00 per kit.
Shipping fees info:
a. Via SAPO Domestic Parcel Service with a tracking number: R70.00 for the first unit (i.e. 1 unit), then R5.00 for each additional unit thereafter. SAPO's Insurance (optional but recommended) is charged at 3% of the total order value.
b. Buyers are free to use a shipping method of their choice. Collections are allowed in Glen Marais, Kempton Park. We also use alternative shipping/courier methods. Kindly ask us for competitive rates for your local area.
Click on the URL link below for more products on offer:
https://www.bidorbuy.co.za/seller/1898061/krantzy
Problem with the WIFI signal in your home?
Solve it with the Wireless-N mini router wi-fi transponder and wi-fi amplifier.
Ideal for the workplace or home for retransmission of the WiFi signal and extension of its radius.
Extend the range of your wireless network even to a different floor.
With speeds of up to 300 Mbps.
It is simple and easy to use, plugs in and is easily programmed.
Coverage Area: Indoor: 30m, Outdoor: 50m.
Signal Rate: 2.4GHz, 300Mbps. Transmit Power: Less than 20dBm.
Improve wireless coverage in all WLAN networks.
WLAN 802.11n for wireless high-speed access.
Downward compatible with 802.11g (54Mbit/s) and 802.11b standard (11Mbit/s)
Support 2.4GHz WLAN networks.
Maximum WLAN security with WPA2, WPA and WEP (128/64).
Software wizard for simple setup.
Integrated Antennae.
Support Wireless Repeater Mode and Standard AP Mode.
Come with 4 LED indicators (Power LED, WLAN LED, WPS LED, LAN LED).
Power LED: this LED will light up if the device is connected with power source
WLAN LED: This LED will permanently light up if there is a connection; the LED will flash on data transfer.
WPS LED: If the WPS button is pressed, the LED will flash for the period when a connection is sought.
LAN LED: the LED will permanently light up if there is a LAN connection; the LED will flash on data transfer.
Note: If you need to reset the WiFi Repeater, you need to press and hold the reset button inside the tiny hole for 10 seconds. Input: AC100~240V, 50/60Hz. Output: 5V/1A
System Requirements:
WLAN access point/client according to IEEE 802.11n/g/b. 110-230 volt socket.
The WLAN client must support at least the WPA encryption standard.
WLAN access point and the WLAN client with automatic IP address assignment(DHCP).
Forwarding of IPv4-based protocols/Address Resolution Protocol.
The network name (SSID) of the WLAN access point must be set to visible.
What's in the box: 1 x WiFi Repeater, 1 x Ethernet Cable, 1 x User Manual.
