R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable. Check my rate
The seller has indicated that they will usually have this item
ready to ship within 3 business days.
Shipping time depends on your delivery address.
The most accurate delivery time will be calculated at checkout,
but in general, the following shipping times apply:
The Wi-Fi Repeater is a combined wired/wireless network connection device specially designed for small business, office, and home office networking requirements. It allows a wireless network to be expanded using multiple access points without the need for a wired backbone to link them. It also works well with other 11b/g and 11n protocol wireless products.
Features
- Colour: white. - 100% brand new and high quality Wireless-N Wi-Fi Repeater. - Extend the range of your WLAN network easily with this Wi-Fi Repeater. - Access to the internet for computers located on the edge or outside of the range of your access point. - The connection to a media receiver you can use to receive television over the internet. - Support Wireless Repeater Mode and Standard AP Mode. - WLAN 802.11n for wireless high-speed access. - Downward compatible with 802.11g (52Mbit/s) and 802.11b (11Mbit/s). - Support 2.4GHz WLAN networks. - Maximum WLAN security with WPA2, WPA and WEP (128/64). - Antennas integrated. - Come with 4 indicators (power indicator, wireless indicator, WPS indicator, LAN indicator). - Note: if you need to reset the Wi-Fi Repeater, you need press and hold the reset button inside the tiny hole for 10 seconds.
System Requirements
- WLAN access point/client according to IEEE 802.11n/g/b. - 110-230 volt socket. - The WLAN client must support at least the WPA encryption standard. - WLAN access point and the WLAN client with automatic IP address assignment (DHCP). - Forwarding of IPv4-based protocols/Address Resolution Protocol. - The network name (SSID) of the WLAN access point must be set to "visible".
