
Wireless-N Wifi Repeater 802.11N/G/B Network Expander Signal Booster 300Mbps *FREE DELIVERY*
Check my rate
Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
FREE DOOR TO DOOR COURIER- all MAIN CENTRES ONLY
FREE COUNTER TO COUNTER POST OFFICE- ALL AREA'S
EXCELLENT QUALITY
Wireless-N Wifi Repeater 802.11N/G/B Network Router Range Expander Signal Booster 300Mbps
Description:
The WIFI Repeater, also called range extender is used to broaden range of a wifi network. A wifi repeater works by receiving the Wifi signal from a router and then amplify and rebroadcast it around locally. With a wifi repeater Computers and printers that are located out of the original range of access point can access the extended wifi network. Wifi repeater effectively doubles the coverage area of your existing Wifi network, extend your network to the far end of your home or office, you just need to place it half way between the computers and router.
ALSO Excellent to boost signal between the latest wifi IP camera's and the router, these cameras need as much signal as possible. weak signal causes freezing or stuttering of live video.
Features:
Improves wireless coverage in all WLAN networks
WLAN 802.11n for wireless high-speed access
Downward compatible with 802.11g(54Mbit/s) and 802.11b standard(11Mbit/s)
Support 2.4GHz WLAN networks
Maximum WLAN security with WPA2, WPA and WEP(128/64)
Software wizard for simple setup
Antennas integrated
Specifications:
Ports - 1 x RJ45
Button - Reset WPS
LED - 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
Chipset - RTL8196C
Flash - 16Mbps
SDRAM - 128Mbps
Power Supply - Internal DC5V / 1A
Power Consumption - 2.3W
Rated Voltage/ frequency /current - 100-240 Va.c. 50/60Hz, 0.1A Max , CLASSII
Requirements:
110 ~ 230-volt socket
The WLAN client must support at least the WPA encryption standard.
WLAN access point and the WLAN client with automatic IP address assignment (DHCP)
Forwarding of IPv4-based protocols/Address Resolution Protocol
The network name (SSID) of the WLAN access point must be set to "visible".
WLAN access point/client according to IEEE 802.11n, g, b.
Package Contents:
1 x Wireless-N repeater
1 x RJ-45 networking cable
1 x Quick installation guide