XH-W3102 5000W AC 220V Digital Display Thermostat Synchronous Heating Temperature Control Module
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615107195
Specification:
Product Name: Digital Thermostat? Product model: XH-W3102 Temperature measurement range: -50 ~ 110 a?? Temperature measurement accuracy: ± 0.1 a?? Temperature control range: -19~ 99 a?? Temperature control accuracy: 0.1 a?? Temperature probe: 2 m probe Power supply voltage: DC12/24V AC 220V Applicable environment: - 15 ~ 55 a?? / 20% ~ 85% RH Output type: 30A Relay direct output Dimension: 96* 70 * 46mm Product weight: 248g
Package included:
1 x Digital Thermostat
Function parameter:
P1-Working mode: Setting range: C (cooling)/H (heating) Factory value: C Setting method: long press the up button for 3 seconds to set the heating mode; long press the button for 3 seconds to set the cooling mode. No operation is automatically saved and exited.
Set temperature: Setting range: -19~99a?? Factory value: 28a?? Setting method: Press the set button once, the set temperature flashes, and then press the up and down buttons to set the value. Press the shutdown button or automatically save without operation.
P2-Temperature difference Setting range: 1~30a?? Factory value: 2.0a?? Setting method: long press the setting key for more than 3 seconds to enter P1, then press the setting key again to enter P2, then press the up and down keys to set the temperature difference value, press the shutdown key or no operation to automatically save and exit.
P3-Temperature correction Setting range: -9.9 ???9.9a?? Factory value: 0a?? Setting method: long press the setting key for more than 3 seconds to enter P1, then press the setting key twice to enter P3, then press the up and down keys to set the temperature correction value, press the shutdown key or no operation to automatically save and exit.
Restore factory settings: After power on, press the up and down keys simultaneously for more than 5s to display 88888
NOTE: 1. The screen displays LLL, indicating that the temperature measuring probe is not plugged in, disconnected, damaged, just replace it. 2. The screen displays HHH, indicating that the temperature probe is short-circuited and exceeds the temperature detection range.
Product Name: Digital Thermostat? Product model: XH-W3102 Temperature measurement range: -50 ~ 110 a?? Temperature measurement accuracy: ± 0.1 a?? Temperature control range: -19~ 99 a?? Temperature control accuracy: 0.1 a?? Temperature probe: 2 m probe Power supply voltage: DC12/24V AC 220V Applicable environment: - 15 ~ 55 a?? / 20% ~ 85% RH Output type: 30A Relay direct output Dimension: 96* 70 * 46mm Product weight: 248g
Package included:
1 x Digital Thermostat
Function parameter:
P1-Working mode: Setting range: C (cooling)/H (heating) Factory value: C Setting method: long press the up button for 3 seconds to set the heating mode; long press the button for 3 seconds to set the cooling mode. No operation is automatically saved and exited.
Set temperature: Setting range: -19~99a?? Factory value: 28a?? Setting method: Press the set button once, the set temperature flashes, and then press the up and down buttons to set the value. Press the shutdown button or automatically save without operation.
P2-Temperature difference Setting range: 1~30a?? Factory value: 2.0a?? Setting method: long press the setting key for more than 3 seconds to enter P1, then press the setting key again to enter P2, then press the up and down keys to set the temperature difference value, press the shutdown key or no operation to automatically save and exit.
P3-Temperature correction Setting range: -9.9 ???9.9a?? Factory value: 0a?? Setting method: long press the setting key for more than 3 seconds to enter P1, then press the setting key twice to enter P3, then press the up and down keys to set the temperature correction value, press the shutdown key or no operation to automatically save and exit.
Restore factory settings: After power on, press the up and down keys simultaneously for more than 5s to display 88888
NOTE: 1. The screen displays LLL, indicating that the temperature measuring probe is not plugged in, disconnected, damaged, just replace it. 2. The screen displays HHH, indicating that the temperature probe is short-circuited and exceeds the temperature detection range.
