| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
The glass property is 6 mm of double plating and hardened PC glass.
Light cup: No light cup
Product Material: spaceflight level Aluminium alloy
White light colour temperature: 6000K
Red light colour temperature: 620 nM
Blue light colour temperature: 455 nM
The beam angle is 120
Waterproof rate: IPX8
Maximum power300W
Switch type: Button Switch on lamp head
Surface craft: three-stage hard anodic oxidation.
Irradiation distance: 300500 metres
Power supply: four 18650 battery
Working voltage: 3.7V
Product colour: Black
Net weight: 456g
Diving depth: 60 m beneath the surface
Size: 123mm (length), 65mm (head diameter), 53mm (diameter of the end)
Operation Instruction:
White light switch Mode (the left power key): high (100%) / Middle(25%) / Weak (12%)(OFF to Long press the button for 2 seconds for any mode)
Red and blue light switch modes (the right power key): Red / Red slow flash / Blue / Red fast flash (double-click the button at any mode) / OFF (Long press the button for 2 seconds at any mode)
Maintenance Tips:
1.You need to tighten the body of the flashlight and the lamp head.
2. Note that the flashlight is very powerful and requires a lot of current. It is recommended to use a power battery; the battery discharge rate can reach 3C or 5C If your battery current is very small, the white light of the flashlight will not work.
3. Appearance precautions: the flashlight supports the use of a pointed battery,the flat battery cannot touch the circuit board, and the flashlight cannot be used normally
4. Do not shine the light beam directly into your eyes.
5. Do not install the battery in reverse polarity.
6. After use, you should wash your diving lights thoroughly in fresh water along with the rest of your equipment.
7. Clean, lubricate, and inspect the O-rings; that would be better for the flashlight's long-term use.
8. Clean the battery and electrical contacts.
9. Store your scuba diving lights without their batteries to prevent any possible corrosion from battery leakage.
10. Always recharge the battery when the light goes dim; thus, overwork of batteries can be avoided and their lifetime could be extended.
11. Store your dive lights in a cool, dry place out of direct sunlight.
Accessories shipped: diving flashlight, diving bracket clip, waterproof rubber ring
Application environment: daily carrying outdoor adventure diving supplies
