This item has closed with no items sold
View other items offered by techietoys68
YELANGU YLG9929C MX4 Dual-Channel 100CH UHF Wireless Microphone System with Transmitter and Receiver
New
R2,364.00
Closed
6 May 24 02:32
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Product code
MCP0189B
Bob Shop ID
613904752
Specifications
1. Frequency response: 30Hz-18KHz
2. Delay of sound transmission: <0.15 ms
3. Microphone specifications: Capacitive omnidirectional
4. De-emphasis: 50uS
5. S/N ratio:>90 dB
6. Maximum frequency deviation: +/-50 kHz
7. Mute level: 15 dBuV
8. Distortion: >0.9%
9. Number of channels: 100
10. Indicator: RF, IR
11. Audio output: level> 48 dBV
12. Reference distance: 60 meters (outdoor open area)
13. Audio output interface: 3.5 mm jack
14. Antenna: 1/4 wavelength spring antenna (adjustable angle)
15. Headphone output: level 15mW (16 ohm)
16. Power: 2.4V DC (2 AA rechargeable batteries) or 3.0 V DC (2 AA alkaline batteries), battery not included, 5.0 V DC (external USB mobile power supply) to charge the rechargeable batteries, current: 600mA
17. Battery life: Taking 2 AA rechargeable batteries 3200mAh as an example, Group A+B can be used for about 8 hours at the same time; Group A/B can be used for about 12 hours when working alone.
Packing List
1. Receiver x 1
2. Transmitter x 1
3. Manual x 1
4. 3.5 audio 3P male to 3.5 audio 3P elbow cable x 1
5. 3.5 audio 3P male microphone x 1
6. Three-core Canon male connector to 3.5 audio 3P male connector x 1
7. Boot type holder x 1
Features
1. Dual-channel UHF line receiving technology, supporting 2 transmitters to work.
2. Using secondary DSP receiving processor, strong anti-image interference ability.
3. Professional circuit design with LOW-CUT function.
4. Provide Mono stereo output and Stereo mono output.
5. Equipped with a headphone interface, which can be connected to headphones to monitor the radio effect in real time.
6. The volume of monitoring and audio output can be adjusted independently, and has a memory function.
7. Adopt WNCRS acoustic environment noise reduction technology, which can suppress environmental noise and wind noise.
8. Integrate a high-performance audio expander to provide a wider audio real-time dynamic response.
9. Provide 100 wireless channels, you can set multiple groups of channels to work at the same time.
10. Support Line in / MIC in input, Line in is linear input, MIC in is microphone input.
11. It supports charging with a camera, with a charging current of 600mA.
1. Frequency response: 30Hz-18KHz
2. Delay of sound transmission: <0.15 ms
3. Microphone specifications: Capacitive omnidirectional
4. De-emphasis: 50uS
5. S/N ratio:>90 dB
6. Maximum frequency deviation: +/-50 kHz
7. Mute level: 15 dBuV
8. Distortion: >0.9%
9. Number of channels: 100
10. Indicator: RF, IR
11. Audio output: level> 48 dBV
12. Reference distance: 60 meters (outdoor open area)
13. Audio output interface: 3.5 mm jack
14. Antenna: 1/4 wavelength spring antenna (adjustable angle)
15. Headphone output: level 15mW (16 ohm)
16. Power: 2.4V DC (2 AA rechargeable batteries) or 3.0 V DC (2 AA alkaline batteries), battery not included, 5.0 V DC (external USB mobile power supply) to charge the rechargeable batteries, current: 600mA
17. Battery life: Taking 2 AA rechargeable batteries 3200mAh as an example, Group A+B can be used for about 8 hours at the same time; Group A/B can be used for about 12 hours when working alone.
Packing List
1. Receiver x 1
2. Transmitter x 1
3. Manual x 1
4. 3.5 audio 3P male to 3.5 audio 3P elbow cable x 1
5. 3.5 audio 3P male microphone x 1
6. Three-core Canon male connector to 3.5 audio 3P male connector x 1
7. Boot type holder x 1
Features
1. Dual-channel UHF line receiving technology, supporting 2 transmitters to work.
2. Using secondary DSP receiving processor, strong anti-image interference ability.
3. Professional circuit design with LOW-CUT function.
4. Provide Mono stereo output and Stereo mono output.
5. Equipped with a headphone interface, which can be connected to headphones to monitor the radio effect in real time.
6. The volume of monitoring and audio output can be adjusted independently, and has a memory function.
7. Adopt WNCRS acoustic environment noise reduction technology, which can suppress environmental noise and wind noise.
8. Integrate a high-performance audio expander to provide a wider audio real-time dynamic response.
9. Provide 100 wireless channels, you can set multiple groups of channels to work at the same time.
10. Support Line in / MIC in input, Line in is linear input, MIC in is microphone input.
11. It supports charging with a camera, with a charging current of 600mA.