Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Yongnuo RF-603 II N3 Flash Trigger for Nikon
The RF-603 Wireless Flash Trigger act as a wireless flash trigger as well as wireless shutter release trigger.
The trigger consist of two identical Transceiver/Receiver that can be used interchangeably as transmitter or receiver. As a flash trigger, one unit can be use as a receiver, installed with standard hotshoe flash. Another unit is installed on the camera's hotshoe to sync with the transmitter when the shutter is released. As a wireless shutter release trigger, a shutter release cable is connected between the RF-603 shutter release cable port and camera's shutter release port. Another RF-603 act as a trigger to activate the receiver.
The new RF-603 II is improved version of RF-603, it is a remote shutter release as well as a multi-functional radio flash trigger which can synchronously trigger flashes and studio strobes. Through the transceiver based system each item can be used flexibly as trigger or receiver. Only 2 AAA batteries are required as power source for each item.
The 2.4GHz wireless frequency is suitable in most countries and guarantees high speed, distance and stability. Within capacious areas, the remote control distance may reach to 100m. The synchronization speed can reach to 1/320, depending on the situation it may reach to 1/250 or less.
A set consist of 2 equal transceivers. Both of them can be a receiver as well as transmitter. It can trigger 1 flash with one set, since one serves as trigger and one as receiver. You can also buy additional transceivers to trigger 2 or more flashes at the same time. The pictures below just show one of the two sets.
Improved features:
1. Hot shoe locking system to prevent from slipping off.
2. Switch on side for easy operation
3. Enhanced self-detecting system
Specifications
Type: FSK 2.4GHz wireless remote control system
Transmitter Distance: 100M
Channels: 16
Shutter Release: Half-press, Full-press
Shutter interface: 2.5mm socket
Studio flash light interface: standard PC socket
Battery: AAA x 2
Stand-by time: over 45 hours
Size (W x H x D): 37mm x 30mm x 81.5mm
Suitable as Wireless trigger for all Nikon DSLR Cameras
Please indicate in your order which camera you use, and I will include the correct cable:
N1 - Nikon Digital SLR: D200 D300 D700 D800 D810 D1 D1h D1x D2 D2H D2Hs D2X D3 D3X
Nikon Film SLR: F6 F5 F100 F90 F90x N90 N90x
KODAK DCS Pro 14n DCS620
FUJI S3 Pro / S5 Pro
N2 - Nikon D70S D80
N3 - Nikon D7100 D7000 D5200 D5100 D5000 D90 D3000 D3100 D3200
I ONLY POST TO ADDRESSES IN SOUTH AFRICA - NO INTERNATIONAL SALES