SELECTED OPTION:
VOLTAGE: 12V
.size_table_start table,.size_table_start table tr td { border:2px solid #ddd;}.size_table_start table { width: 100%; min-height: 25px; line-height: 25px; text-align: center; border-collapse: collapse;}.size_table_start,.size_table_end {clear:both;}
Specifications: Product model: ZFX-W1602 Power supply voltage: 12V DC / 24-60V DC / 220V AC Temperature measurement range: -50 ????-110 ???? Temperature measurement accuracy: 0.3 Resolution: 0.1 Temperature control accuracy: 1 ???? Sensing line: NTC / 10K / 3435 L = 1m Output type: direct output Diameter: 86mm
Parameter Settings: 1. In the setting mode, long press the SET button for 5 seconds, P0 will be displayed, and short press the SET button to switch the H / C (H is heating, C is cooling). 2. Set the stop temperature, press the SET button once, the screen flashes, and press the up and down keys to directly set the desired temperature. 3. Press and hold the SET button for 5 seconds to display P0. Press the up and down buttons to switch to P1, and then press the SET button once again to set the return difference (press the up and down buttons to adjust). If the heating mode wants to be set to 35 ???? ~ 37 ???? Time, the stop temperature is set to 37, and the return difference is set to 2. 4. Indicator light: SET light is on, indicating that the parameter is being set: OUT indicator flashes to indicate the start delay, and constant light indicates the output 5. Nixie tube: display LLL as sensor abnormality: display HHH as sensor causing short circuit or exceeding the measurement range, when the temperature is flashing, it is in the setting or alarm state.
Parameter | Features | Range | Defaults |
PO | Operating?mode | Heating?/?cooling?H?/?C | H |
P1 | Backlash?setting | 0.1~30 | 2 |
P2 | Set?an?upper?limit | +5~110?????? | |