3.3V/5V Compact RFID Reader Writer and NFC Module
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615100142
Feature:
This RFID modules base on MFRC522 IC and that can read and write Mifare's tags.
The microcontroller and card reader uses SPI for communication.
The card reader and the tags communicate using a 13.56MHz electromagnetic field.
The RFID MFRC522? module supports MF1xxS20, MF1xxS70 and MF1xxS50 tags.
The RFID MFRC522 module supports contactless communication and uses MIFARE higher transfer speeds up to 848 kBd in both directions.
RFID MFRC522 have compact design and small size 36x36mm.
Power can supply 3.3V or 5V.
This yasy for connection to board with 5V, not need power regulator for 3.3V.
The antenna is built into the board. And it has a good sensitivity to a height of 25mm
Package includes:
1 x RFID Reader
Sketch for :
This RFID modules base on MFRC522 IC and that can read and write Mifare's tags.
The microcontroller and card reader uses SPI for communication.
The card reader and the tags communicate using a 13.56MHz electromagnetic field.
The RFID MFRC522? module supports MF1xxS20, MF1xxS70 and MF1xxS50 tags.
The RFID MFRC522 module supports contactless communication and uses MIFARE higher transfer speeds up to 848 kBd in both directions.
RFID MFRC522 have compact design and small size 36x36mm.
Power can supply 3.3V or 5V.
This yasy for connection to board with 5V, not need power regulator for 3.3V.
The antenna is built into the board. And it has a good sensitivity to a height of 25mm
Package includes:
1 x RFID Reader
Sketch for :
// VCC----5V
// GND----GND // RST----D5 // SDA----D10 // MOSI---D11 // MISO---D12 // SCK----D13 #include #include ? RFID rfid(10,5); ? ?//D10--SDA,?D5--RST ? unsigned char serNum[5];