This item has closed with no items sold
View the relisted Item
View the relisted Item
View other items offered by szulou1789
Similar products
30-100A 230V LCD Display Single-phase Electric Watt-hour Meter DIN-rail Type Installation Household
New
R781.00
Closed
11 May 24 00:03
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
612365719
Specification:
Model: DDS548C Type: Single-phase power meter Basic current: 30A Maximum current: 100A Frequency: 50Hz Reference voltage: 230V Current ratio: 1000imp/ kwh
Display: LCD Display Weight: About 0.28kg Product size: 100 * 76 * 65mm
Feature:
-- Use long life. -- 35mmDIN standard rail mounting
-- High reliability, small size, light weight, beautiful appearance and advanced technology. -- It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability and anti-stealing.
? Use and scope of application: * Can directly and accurately measure the positive active energy in the electric energy metering, and the? 6-digit accumulator?display total power consumption. * This meter is suitable for measuring single-phase AC active energy with rated frequency of? 50Hz or 60Hz, for fixed installation indoors. It is suitable for ambient temperature? not exceeding -25?ﾣC~+55?ﾣC, relative humidity is not more than 95%, and not in air. Contains corrosive gases and prevents dust, mold, salt spray, condensation, insects and other effects.
Installation and use
* An electrician or professional with experience is required to install the meter and be sure to read this manual.
* In places where there is contamination and possible damage to the facility, the energy meter should be installed in a protective cabinet.
? * The electric energy meter with no lead seal or storage time should be re-inspected before the relevant department can be installed and used.
? * When the power meter is removed from the original box, the inner package or the outer casing is damaged. Do not install or power the meter.The electric energy meter should be installed in a ventilated and dry place indoors. It should be installed in? 35mm DIN standard?rail type.?The bottom plate of the electric energy meter should be fixed on the wall which is strong and refractory and not easy to vibrate. ? * When installing the wiring, it should be wired according to the wiring diagram on the electric energy meter case or the corresponding wiring diagram of the manual. It is best to use multi-strand copper wire to prevent the electric energy meter from working abnormally or burning due to poor contact. When the energy meter is properly connected to the power grid, the power indicator of the meter is always on.
Instructions for use * When the electric energy meter is used in areas with high lightning power, lightning protection measures should be taken to avoid damage to the electric energy meter due to lightning strikes. * The load capacity of the energy meter is between? 0.05Ib~Imax (direct access type)?or? 0.02Ib~Imax (via transformer connection type), which exceeds the transformer multiplier and is the actual power consumption. * Data display: meter display * Power indication: When the green light is on, it indicates that the working power of the energy meter is normal. * Pulse indication: When the red light is on, it indicates that the energy pulse is checked. * When there is a sampling signal, the pulse indicator lights up for about? 80ms.
Insulation performance * All the lines of the electric energy meter can withstand a surge voltage of? 1.2/50??S?and a peak value of? 6KV?between the outer casings, and test? 10 times?under the same polarity without arcing or breakdown. * All line-to-ground insulation of the energy meter can withstand an actual positive arc voltage of? 2KV?at a frequency of? 50Hz, which does not break down after one minute of testing. Note:?Please check that all programming is correct before using the meter.
Package Included:
1 x?Single-phase Electric Energy Meter
Model: DDS548C Type: Single-phase power meter Basic current: 30A Maximum current: 100A Frequency: 50Hz Reference voltage: 230V Current ratio: 1000imp/ kwh
Display: LCD Display Weight: About 0.28kg Product size: 100 * 76 * 65mm
Feature:
-- Use long life. -- 35mmDIN standard rail mounting
-- High reliability, small size, light weight, beautiful appearance and advanced technology. -- It has good anti-electromagnetic interference, low power consumption, high precision, high overload, high stability and anti-stealing.
? Use and scope of application: * Can directly and accurately measure the positive active energy in the electric energy metering, and the? 6-digit accumulator?display total power consumption. * This meter is suitable for measuring single-phase AC active energy with rated frequency of? 50Hz or 60Hz, for fixed installation indoors. It is suitable for ambient temperature? not exceeding -25?ﾣC~+55?ﾣC, relative humidity is not more than 95%, and not in air. Contains corrosive gases and prevents dust, mold, salt spray, condensation, insects and other effects.
Installation and use
* An electrician or professional with experience is required to install the meter and be sure to read this manual.
* In places where there is contamination and possible damage to the facility, the energy meter should be installed in a protective cabinet.
? * The electric energy meter with no lead seal or storage time should be re-inspected before the relevant department can be installed and used.
? * When the power meter is removed from the original box, the inner package or the outer casing is damaged. Do not install or power the meter.The electric energy meter should be installed in a ventilated and dry place indoors. It should be installed in? 35mm DIN standard?rail type.?The bottom plate of the electric energy meter should be fixed on the wall which is strong and refractory and not easy to vibrate. ? * When installing the wiring, it should be wired according to the wiring diagram on the electric energy meter case or the corresponding wiring diagram of the manual. It is best to use multi-strand copper wire to prevent the electric energy meter from working abnormally or burning due to poor contact. When the energy meter is properly connected to the power grid, the power indicator of the meter is always on.
Instructions for use * When the electric energy meter is used in areas with high lightning power, lightning protection measures should be taken to avoid damage to the electric energy meter due to lightning strikes. * The load capacity of the energy meter is between? 0.05Ib~Imax (direct access type)?or? 0.02Ib~Imax (via transformer connection type), which exceeds the transformer multiplier and is the actual power consumption. * Data display: meter display * Power indication: When the green light is on, it indicates that the working power of the energy meter is normal. * Pulse indication: When the red light is on, it indicates that the energy pulse is checked. * When there is a sampling signal, the pulse indicator lights up for about? 80ms.
Insulation performance * All the lines of the electric energy meter can withstand a surge voltage of? 1.2/50??S?and a peak value of? 6KV?between the outer casings, and test? 10 times?under the same polarity without arcing or breakdown. * All line-to-ground insulation of the energy meter can withstand an actual positive arc voltage of? 2KV?at a frequency of? 50Hz, which does not break down after one minute of testing. Note:?Please check that all programming is correct before using the meter.
Package Included:
1 x?Single-phase Electric Energy Meter