Analog Devices (MAX3070EEPD+) Transceiver RS422, RS485

Product OverviewThe MAX3070EEPD+ is a ±15KV ESD protected, fail-safe, hot swap RS485/RS422transceiver in 14 pin DIP package. This 3.3V transceiver has one driver and onereceiver. It includes fail-safe circuitry which provides logic high receiveroutput when receiver inputs are open or shorted. The receiver provides logichigh if all transmitters on a terminated bus are disabled (high impedance). Thedevice includes a hot swap capability to eliminate false transitions on the busduring power-up or hot insertion. The MAX3070E has reduced slew rate driversthat minimize EMI and reduce reflections caused by improperly terminated cablesallowing error free data transmission up to 250Kbps. This transceivers draw800µA of supply current when unloaded or when fully loaded with the driversdisabled. The MAX3070E has 1/8 unit load receiver input impedance allowing up to256 transceivers on the bus. It is typically used in lighting systems.Supply voltage range from 2.97V to 3.63VOperating temperature range from -40°C to 85°CIntended for full duplex communicationsEase of design and robust performance±15KV human body model ESD on I/O pinsTrue fail-safe receiver while maintaining EIA/TIA-485 compatibility10µA shutdown current mode for power savingsReceiver/driver enable functionApplicationsCommunications & Networking, Industrial, Security, Sensing & InstrumentationProduct InformationDevice Type: TransceiverIC Interface Type: RS422, RS485No. of Drivers: 1DriversNo. of Receivers: 1ReceiversSupply Voltage Min: 2.97VSupply Voltage Max: 3.63VDriver Case Style: DIPNo. of Pins: 14PinsOperating Temperature Min: -40°COperating Temperature Max: 85°CProduct Range: -Automotive Qualification Standard: -MSL: MSL 1 - UnlimitedIC Generic Number: MAX3070E