This item has closed with no items sold
View the relisted Item
View other items offered by Diy Select - Cape Town7979

Similar products

Battery 18650 Li-ion Balance Board 4s 4.2V **LOCAL STOCK**
R42.00
R35 shipping
Battery Li-ion Active Equalizer Board 4s **LOCAL STOCK**
R145.00
Battery 18650 Li-ion Balance Board 3s 4.2V **LOCAL STOCK**
R35.00
R35 shipping
Battery Li-ion Active Equalizer Board 3s **LOCAL STOCK**
R125.00
Battery Li-ion Active Equalizer Board 4s **LOCAL STOCK**

Battery Li-ion Active Equalizer Board 4s **LOCAL STOCK**

5 were available / new
R145.00
Shipping
R35.00 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30.00 surcharge. This will be calculated at checkout if applicable.
Check my rate
The seller allows collection for this item. Buyers will receive the collection address and time once the order is ready.
The seller has indicated that they will usually have this item ready to ship within 2 business days. Shipping time depends on your delivery address. The most accurate delivery time will be calculated at checkout, but in general, the following shipping times apply:
 
Standard Delivery
Main centres:  1-3 business days
Regional areas: 3-4 business days
Remote areas: 3-5 business days
Buyer protection
Get it now, pay later

Product details

Condition
New
Location
South Africa
Product code
BAT294C
Bob Shop ID
615481827

Battery Active Equalizer Li-ion/LiFePO4 Board 4s:

 

Specifications:

Working Voltage: 2 - 4.5V DC
For Use of: Universal ternary lithium iron battery, NCM,LFP. Lithium Titanium Oxide (LTO) or Lithium Cobalt Oxide (LCO) battery is not applicable!
Size: 136 x 80mm

This board is based on the principle of adjacent equalization and cannot be used as a maintenance tool. To connect to the battery, it must be used with the lithium battery protection board. The pressure difference generated by charging and discharging triggers the work of the equalization board to achieve energy transfer and balance. Inductive energy transfer balance board, high current 1.2A energy transfer battery voltage balancer, significantly improves the balance of battery voltage and overall use efficiency of the battery pack.

This module is the adjacent voltage difference equalization, when the adjacent battery voltage difference reaches more than 0.1V, the internal chip triggers the equalization work, until the adjacent battery voltage difference is within 0.03V and stops working, when it is used on the battery pack, there is adjacent voltage difference when charging and discharging Triggering the equalization work, the battery pack voltage error will also be pulled back to an ideal value.


Balance Instructions
1. When the equalization light is on, the equalization work is turned on
2. The equalization light is off, and the equalization circuit is in sleep state
3. The equalization light flashes, indicating that the string is dropped, or the circuit is faulty.

Balance current
1. The adjacent voltage difference is more than 0.1V (the current is about 0.5-0.7A)
2. Adjacent voltage difference is more than 0.2V (maximum equilibrium current is 1.2A)
3. The smaller the voltage difference, the smaller the equalizing current.


Welding Points:

B- : Connect to battery 1 negative
B1 : Connect the point between battery 1 and battery 2
B2 : Connect the point between battery 2 and battery 3
B3 : Connect the point between battery 3 and battery 4
B4 : Connect to battery 4 positive

First contact the B- pin and add one battery at a time till the last B4, otherwise it may cause the board to burn.

Please see all our listings here:
https://www.bidorbuy.co.za/seller/4397469