Main centres: | 1-3 business days |
Regional areas: | 3-4 business days |
Remote areas: | 3-5 business days |
Product type | Sliding Gate Motor |
Model | Centurion D2 Turbo |
Input voltage | 90V - 240V AC ± 10%, 50Hz |
Motor voltage | 12V DC |
Motor power supply | Battery-driven (standard capacity - 12V 5Ah) |
Current consumption (mains) | Intergral with controller 1A @ 13.7V ± 1% |
Current consumption (rated load) | 8/12A |
Current consumption (quiescent load) | 95mA |
Operator push force - starting | 18kgf |
Operating push force - rated | 8kgf |
Gate mass - maximum | 250kg |
Gate length | 20m |
Gate speed - m/min | 22 - 26m/min |
Gate speed - mm/sec | 367 - 433mm/sec |
Drive pinion | 17T Module 4 |
Maximum daily cycle | 10 cycles/day |
Design life | 30 000 cycles |
Collision sensing | Electronic |
Operating temperature | -15 °C to 50 °C |
Degree of protection | IP54 |
Controller incorporated | D2 Controller_H |
Onboard receiver type | Nova code-hopping onboard, multichannel |
Receiver frequency | 433.92MHz |
Receiver code storage capacity | 32 transmitter buttons |
Dimensions - motor | 244mm(l) x 170mm(w) x 310mm(h) |
Dimensions - remote | 35mm(l) x 17mm(w) x 60mm(h) x 2 |
Dimensions - packaging | 255mm(L) x 188mm(W) x 333mm(H) |
Mass of unit packed | 5.75kg |
Warranty | 24 Month carry in Manufacturers warranty |
• Ensure that the track is kept clear from stones, dirt or any obstruction. Gate brushes can be installed to assist in clearing the obstructions.
• Ensure that the Gate wheels V profile, Gate wheels U profile or GateshoX run freely.
• Manual override the motor and check that the gate runs freely without any obstruction.
• Check that the rack is properly secured to the gate and that it does not press down on the operator pinion at any point while opening or closing.
• Clean around the motor area to ensure that vegetation does not grow to close to the motor and pinion.
• Check that the key still opens and closes the camlock and lubricate if necessary.
• Inspect the inside of the motor by removing the cover and ensure that it is clear of any insects and dust.
• Alternate spare remote controls to ensure that they are working if and when required.
• Test remotes not used often and replace the remote batteries if and when required.
WARNINGS AND LIMITATIONS
• All installations must be done by a suitable qualified technician.
• Under no circumstances may any of the components be modified.
WARRANTY
• 24 Month Carry-in Product Manufacturers warranty. The D2 Motor can be registered online at CentSys.co.za for warranty purposes.
WHAT'S IN THE BOX
1 X Centurion D2 Motor
2 x Centurion Nova 4 Button remotes
1 x Centurion D2 controller — Inside motor
1 x Origin Marker
1 x Base plate
1 x Pack of mounting screws, nuts, washers and bolts
NO BACKUP BATTERY INCLUDED