DC5-30V 5A 150W LED Dimming Module PWM DC Motor Speed Controller Digital Display Encoder Cuty Cycle
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 12 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615101503
Description:
Comes with start and stop buttons, and can be controlled by external switches to meet customers' various control needs
Soft start function of the motor, the current will increase slowly when starting the motor, no impact current, effectively protect the motor and extend the service life of the motor
You can set the duty cycle, the upper and lower limits of the duty cycle, and the operating frequency, which is convenient for customers to operate and use according to the operating characteristics of their motors.
The digital encoder knob adjusts the motor speed, which is higher accuracy and consistency than ordinary potentiometer adjustment.
With standard 5135 instrument housing, easy to install.
Parameter:
DC5V ~ 30V, input anti-reverse protection
Rated current: 5A maximum current 15A
Maximum power: 150W
Working frequency: 1KHz ~ 99KHz adjustable, 1KHz step, default frequency is 20KHz, accuracy is about 1%
Duty cycle: 0-100%, 1% step
Product size: 79mm * 43mm * 26mm
Product weight: 41g
Digital encoder knob operation:
In the default interface: (the default display is the duty cycle)
Short press-switch the motor on and off
Long press-enter the setting interface
Counterclockwise rotation-reduced duty cycle
Turn clockwise-duty cycle increases
Under the setting interface:
Short press-select the setting parameter, and the setting parameter switches between the lower duty cycle limit, the upper duty cycle and the operating frequency. The lower duty cycle display format is L + two digits. The upper duty cycle display format is H + two digits or 100. The operating frequency display format is F + two digits.
Long press-exit the setting interface
Rotate counterclockwise-the corresponding setting parameters are reduced
Turn clockwise-the corresponding setting parameters increase
Back STOP port:
It can be connected with an external switch button or 3.3V level. When the button is closed or the 3.3V level is pulled down, the start / stop state of the motor can be switched.
Package included:
1 x DC5-30V 5A 150W LED Dimming Module
Comes with start and stop buttons, and can be controlled by external switches to meet customers' various control needs
Soft start function of the motor, the current will increase slowly when starting the motor, no impact current, effectively protect the motor and extend the service life of the motor
You can set the duty cycle, the upper and lower limits of the duty cycle, and the operating frequency, which is convenient for customers to operate and use according to the operating characteristics of their motors.
The digital encoder knob adjusts the motor speed, which is higher accuracy and consistency than ordinary potentiometer adjustment.
With standard 5135 instrument housing, easy to install.
Parameter:
DC5V ~ 30V, input anti-reverse protection
Rated current: 5A maximum current 15A
Maximum power: 150W
Working frequency: 1KHz ~ 99KHz adjustable, 1KHz step, default frequency is 20KHz, accuracy is about 1%
Duty cycle: 0-100%, 1% step
Product size: 79mm * 43mm * 26mm
Product weight: 41g
Digital encoder knob operation:
In the default interface: (the default display is the duty cycle)
Short press-switch the motor on and off
Long press-enter the setting interface
Counterclockwise rotation-reduced duty cycle
Turn clockwise-duty cycle increases
Under the setting interface:
Short press-select the setting parameter, and the setting parameter switches between the lower duty cycle limit, the upper duty cycle and the operating frequency. The lower duty cycle display format is L + two digits. The upper duty cycle display format is H + two digits or 100. The operating frequency display format is F + two digits.
Long press-exit the setting interface
Rotate counterclockwise-the corresponding setting parameters are reduced
Turn clockwise-the corresponding setting parameters increase
Back STOP port:
It can be connected with an external switch button or 3.3V level. When the button is closed or the 3.3V level is pulled down, the start / stop state of the motor can be switched.
Package included:
1 x DC5-30V 5A 150W LED Dimming Module