Geekcreit Portable Mini Automatic Spot Welding Machine Control Board 12V/5.6V Portable Lithium Bat
New
Shipping
Standard courier shipping from R30
R30 Standard shipping using one of our trusted couriers applies to most areas in South Africa. Some areas may attract a R30 surcharge. This will be calculated at checkout if applicable.
Check my rate
Check my rate
Ready to ship in
The seller has indicated that they will usually have this item
ready to ship within 15 business days. Shipping time depends on your delivery address. The most
accurate delivery time will be calculated at checkout, but in
general, the following shipping times apply:
Standard Delivery
| Main centres: | 1-3 business days |
| Regional areas: | 3-4 business days |
| Remote areas: | 3-5 business days |
Returns
Get it now, pay later
Seller
Buyer Protection
Product details
Condition
New
Location
International
Bob Shop ID
615113728
Instructions for use of automatic spot welding control board:
1. Power requirements: In 12V mode, voltage input is 7-15V (12V recommended), in 5.6V capacitor mode, voltage supports 3.7-6V (recommended 5.6V), current requirements: can output actual current 120-360A 2. Button function: switch between 1 power level-2 power level-3 power level-4 power level after long press for 3 seconds 3. The red light is always on (automatic spot welding with 1 power level, press for about 1 second to spot welding) Red light is flashing (automatic spot welding with 2 power levels, pressing for about 1 second spot welding) The blue light is always on (automatic spot welding with 3 power levels, pressing for about 1 second spot welding) Blue light flashes (automatic spot welding with 4 levels of power, pressing for about 1 second spot welding) Green light is always on (waiting for spot welding) 4. Buzzer prompt, output once for each spot welding, buzzer buzzes once 5. The MOS is damaged, the indicator light flashes red and green alternately, and the buzzer sounds piercing (at this time, note that the spot welding pen cannot be spot welded, and the two needles cannot touch each other)
Package includes:
1 x spot welding control board with pen
1. Power requirements: In 12V mode, voltage input is 7-15V (12V recommended), in 5.6V capacitor mode, voltage supports 3.7-6V (recommended 5.6V), current requirements: can output actual current 120-360A 2. Button function: switch between 1 power level-2 power level-3 power level-4 power level after long press for 3 seconds 3. The red light is always on (automatic spot welding with 1 power level, press for about 1 second to spot welding) Red light is flashing (automatic spot welding with 2 power levels, pressing for about 1 second spot welding) The blue light is always on (automatic spot welding with 3 power levels, pressing for about 1 second spot welding) Blue light flashes (automatic spot welding with 4 levels of power, pressing for about 1 second spot welding) Green light is always on (waiting for spot welding) 4. Buzzer prompt, output once for each spot welding, buzzer buzzes once 5. The MOS is damaged, the indicator light flashes red and green alternately, and the buzzer sounds piercing (at this time, note that the spot welding pen cannot be spot welded, and the two needles cannot touch each other)
Package includes:
1 x spot welding control board with pen
